Abstract:This paper investigates concrete-filled dual steel stiffened tubular (CFDSST) slender columns with a cold-formed stiffened outer tube, a square inner tube and concrete infill between the two steel sections and also inside the inner section. To the best of the authors' knowledge, the behaviour of these types of slender column has not previously been studied, although the behaviour of short columns has been previously explored. Accordingly, the details and development of a finite element model are presented, as well as the validation against available test data. The model is employed to conduct an extensive parametric study to examine the behaviour of CFDSST slender columns with different geometric and material properties. Based on an analysis of the strain distributions in the cross-section, a method for defining intermediate-length and long columns is proposed. It is shown that the slenderness ratio is a very important parameter in the behaviour of CFDSST columns, affecting both the capacity and the failure mode. Other important variables for intermediate-length columns are shown to be the yield strength of the outer steel tube, the strength of the sandwiched concrete and the width-to-thickness ratio of the outer tube whilst only former of these is shown to be very influential for long columns. The ultimate strengths are compared with a number of different design methods, which were suitably adapted for the section types, owing a lack of specific guidance currently available. Based on the results it was recommended that the AS/NZS 2327 design standard provides the most accurate reflection of the real behaviour for CFDSST slender columns.

Global Buckling Behavior of CFST Columns with Assembling Errors

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Compressive Behavior and Design Calculations of CFST Slender Columns with Latticed Annular Steel Part

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Global Stability Design of Concrete-Filled Corrugated Steel Tubular Columns

Experimental study on multi-cellular L-shaped CFST slender columns under biaxial eccentric compression

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Behaviour and Design Calculations on Very Slender Thin-Walled Cfst Columns

Stability of Slender Concrete-Filled Steel Tubular X-column under Axial Compression

Global buckling behaviour and design of square cold-formed concrete-filled dual steel stiffened slender columns

Experimental and Numerical Analysis of Large-Scale Circular Concrete-Filled Steel Tubular Columns with Various Constructural Measures under High Axial Load Ratios

Study on axial static behavior of planar intersecting connection of CFST columns

Nonlinear Analysis of ECC-encased CFST Columns under Axial Compression

Rigidity Estimation of Embedded CFST Column-to-beam Connections

Finite Element Analysis on Behavior of Reinforced Hollow High Strength Concrete Filled Square Steel Tube Short Columns under Axial Compression

AXIAL COMPRESSION BEHAVIOR OF SQUARE THIN-WALLED CFST COLUMN TO RC BEAM JOINTS

Finite element analysis and bearing capacity calculation of cross-shaped CFST columns under compressive load