Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

Three Compact Active Baluns with High Phase/Amplitude Balance and Low Power in 65-nm CMOS for Transceiver Applications

Compact CMOS Baluns for the 4–10 GHz Band Applications

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

A Compact 1.08–5.94 GHz Balun with 1○/0.07 Db Phase-/Amplitude-Imbalances Using Reverse Series Paths

Compact broadband Marchand balun with excellent imbalance performance for Si-based millimeter wave IC applications

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

A 0.13-Mu M Cmos 0.1-12 Ghz Active Balun-Lna For Multi-Standard Applications

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

800Mhz~2.5ghz Miniaturized Multi-layer Symmetrical Stacked Baluns for Silicon Based RF ICs

Millimeter Wave Balun Design and Optimization Based on Compensation Matching Capacitors and Active S Parameter

Input-Reflectionless 2.4–3.8 GHz Balun With Low Phase/Amplitude Imbalance Using Stacked-Coupled Microstrip Line

Compact 6.5-28.5 GHz On-Chip Balun with Enhanced Inband Balance Responses

A Broadband Monolithic Balun Based on 0.13μ CMOS m Process Using Planar-Spiral Transformers

1.34-To-16.37 GHz On-Chip Balun Based on Asymmetric Stacked Spiral Transformers

A Broadband Monolithic Balun Based on 0.13/spl mu/m CMOS Process Using Planar-Spiral Transformers

Investigation of A Compact and Broadband Balun

Design Analysis of Integrated Passive Device-Based Balun Devices with High Selectivity for Mobile Application

An Area-Saving Balun for Multiband IoT Transmitter

A 0.13-μm CMOS 0.8–10.6GHz low noise amplifier with active balun for multi-standard applications

Design Of 0.35-1.5ghz 2-Input 3-Output Sige Switch Cell With Active Balun

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits