Abstract:This article presents a numerical short-open-load (SOL) calibration technique for accurate extraction of electrically small planar/nonplanar microstrip-line (MSL) circuits and elements in the interface of 3-D full-wave algorithm or simulator. An additional matched-load condition is established at the reference plane and employed in the whole calibration process. In comparison with the traditional short-open calibration (SOC) method, the proposed SOL technique implemented in the interface of software does not inquire prior simulation of the internal current/voltage at the reference plane of two calibration standards but only needs to know the external port impedances of three calibration standards. After the description of entire extraction process, a few typical electrically small planar circuits, such as MSL open-end and step discontinuities, are first numerically deembedded, and their extracted circuit parameters are evidently confirmed with other published ones. Then, a nonplanar structure of a vertically placed shorting pin in the middle of MSL is studied with different sizes and positions to effectively extract the circuit parameters in the two presented equivalent models. Finally, a third-order Chebyshev filter is designed with pin-loaded MSL structures. Its frequency response is synthesized on the proposed SOL method to validate the correctness of the extracted circuit parameters and further demonstrate the usefulness of this method in synthesis design of electrically large microwave circuits. Good agreement among the filtering frequency responses from equivalent circuit model, full-wave simulation, and measurement has well revealed that the proposed SOL method is indeed accurate in numerical extraction of circuit elements and efficient in synthesis design of an entire circuit with prescribed specifications.

Four-Port SOLR Calibration Algorithm for Symmetric GSSG Probes

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

A Novel Four-Port Calibration Method for High Frequency On-Wafer S-parameter Measurement

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

2-Port GSG Probe Calibration Using TRL and 16-Term Error Model Up to 100Ghz

A hybrid probe-tip calibration for multiport vector network analyzers

Sensitivity Analysis of S-Parameter Measurements Due to Nonideal SOLR Calibration Standards

A New SOLT Calibration Method for Leaky On-Wafer Measurements Using a 10-Term Error Model

An Ultrawideband Asymmetric Calibration Method for a Simultaneously Electromagnetic Near-Field Probing System

Efficient Calibration of a Scanning Probe on CMM

Comparison of On-Wafer TRL Calibration to ISS SOLT Calibration With Open-Short De-Embedding up to 500 GHz

Symmetric-Reciprocal-Match Method for Vector Network Analyzer Calibration

Asymmetric Calibration and Characterization for Diff-port Magnetic Field Probing System

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

Numerical Short-Open-Load (SOL) Calibration Technique for Accurate Extraction of Electrically-Small Planar/Non-Planar Microstrip-Line Circuits

A High-Precision GSG Probe Planarization Method Based on Direct Current Signal

Fabrication of a microscopic four-point probe and its application to local conductivity measurement

A Broadband Active Dual Probe by Asymmetric Calibration Method