Abstract:Based on the principle of electrostatic induction, the geometric structure of capacitive electrostatic probe is optimized. An online measurement method for insulator surface charges is analyzed using the capacitive electrostatic probe. This method is suitable for online measurement of the surface charge distribution on ±320 kV GIL tri‐post insulators. Compared to offline measurement (interrupting the applied voltage before measurement), online measurement of surface charge on gas‐insulated transmission line (GIL) insulators effectively avoids the impact of spontaneous dissipation of charges. Thus, the accuracy of results can be improved. In this article, a measurement model of capacitive electrostatic probes for surface charges on ±320 kV GIL tri‐post insulator is established. The geometry of probes is optimized. The feasibility of online measurement of surface charges is analyzed. Results indicate that the surface leakage distance of induced charges is positively related to the length. Furthermore, as the diameter of probes increases, the maximum electric field on the sensitive electrode surface rises, while the radius of the sensitive electrode has the opposite effect. Hence, the diameter of the probe is 6 mm. The length and radius of sensitive electrodes are 50 mm and 1.2 mm, respectively. For online measurement of surface charges on ±320 kV tri‐post insulators, the induced potential distribution of the probe is consistent with surface charges. Therefore, the capacitive electrostatic probe in the embedded electrode is appropriate for the online measurement of surface charges on tri‐post insulators. It provides a reference for avoiding flashover triggered by surface charge accumulation on DC GIL insulators.

A High-Precision GSG Probe Planarization Method Based on Direct Current Signal

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

Parameter Characterization Of Silicon-Based Patterned Shield And Patterned Ground Shield Coplanar Waveguides

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

A reproducible electropolishing technique to customize tungsten SPM probe: From mathematical modeling to realization

Design of Microstrip Line used for Probe Calibration up to 40 GHz

A dual-probe three-dimensional profile measurement system

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

Development of a New Microscopic Four-Point AFM Probe for the Measurement of Local Electrical Conductivity

The Art of Electrochemical Etching for Preparing Tungsten Probes with Controllable Tip Profile and Characteristic Parameters

Systematic Study of Electropolishing Technique for Improving the Quality and Production Reproducibility of Tungsten STM Probe

W Band GSG Probes Fabricated by DRIE Manufacturing

Design and Fabrication of a Silicon Probe for Surface Profilers

Fabrication of a microscopic four-point probe and its application to local conductivity measurement

Quantitative Investigation of Surface Charge Distribution and Point Probing Characteristics of Spherical Scattering Electrical Field Probe for Precision Measurement of Miniature Internal Structures with High Aspect Ratios

A W-Band GSG Probe Fabricated by Metal Additive Manufacturing.

Application of calibrated and reusable probes on a home-made scanning probe microscope platform

The Investigation of the Signal Radiation Mechanism of Different GSG‐pads Connection Methods

Ultrasonic Probe Position and Orientation Planning for Curved Components with Variable Thickness Based on Ultrasonic Beam Analysis

A Novel Four-Port Calibration Method for High Frequency On-Wafer S-parameter Measurement

Design of capacitive electrostatic probes for online measurement of surface charge on ±320 kV tri‐post insulators