Abstract:Non-destructive tests working at lower microwave frequencies have large advantages of dielectric material penetrability, lower equipment cost, and lower implementation complexity. However, the resolution will become worse as the work frequencies become lower. Relying on designing the structure of high field confinement, this study realizes a simple complementary spiral resonators (CSRs)-based near-field probe for microwave non-destructive testing (NDT) and imaging around 390 MHz (λ = 769 mm) whereby very high resolution (λ/308, 2.5 mm) is achieved. By applying an ingenious structure where a short microstrip is connected to a microstrip ring to feed the CSR, the probe, that is a single-port microwave planar circuit, does not need any extra matching circuits, which has more application potential in sensor arraying compared with other microwave probes. The variation of the electric field distribution with the standoff distance (SOD) between the material under test and the probe are analyzed to reveal the operation mechanisms behind the improved sensitivity and resolution of the proposed probe. Besides, the detection abilities of the tiny defects in metal and non-metal materials are demonstrated by the related experiments. The smallest detectable crack and via in the non-metal materials and the metal materials are of a λ/1538 (0.5 mm) width, a λ/513 (1.5 mm) diameter, a λ/3846 (0.2 mm) width and a λ/513 (1.5 mm) diameter, respectively. Moreover, to further evaluate the performance of the proposed probe, the defects under skin layer in the multilayer composite materials and the defects under corrosion in the carbon steel are inspected and imaged. Due to lower work frequency, high resolution, outstanding detection abilities of tiny defects, and large potentials in sensor arraying, the proposed probe would be a good candidate for microwave NDT and imaging.

Design of Microstrip Line used for Probe Calibration up to 40 GHz

Design of High-Frequency Differential Line for Ex Probe Calibration

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

A Miniature Multi-Component Probe for Near-Field Scanning

A High-Frequency and High Spatial Resolution Probe Design for EMI Prediction

A Wideband EzEx Field Probe Integrated with a Strip Line Magic-T

A Miniature Resonant Magnetic Field Probe Integrated with MLCC

Probe Design and Source Reconstruction for Near-Field Scanning and Modeling

A High Frequency Probe with End Launch Structure

A New Scheme of Embedded RF Probe an Embedded Three-Port Loop of RF Parameters Detection

E x -E y hybrid Probe for High Frequency Electromagnetic Interference Measurement

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

A Resonant Magnetic Field Probe with Enhanced Sensitivity Using Quarter-wavelength Impedance Transformer

Investigation of Multilayer Print Circuit Board Probe with Temperature Compensation for Ultra-Wideband Near-Field Measurement

Dual-Components Magnetic Probe for Electromagnetic Interference Measurement

Design and Calibration of an Ungrounded Double-Loop Active Differential Magnetic Probe

A Miniature Electric Probe with a High Spatial Resolution

A Wideband E z E x Field Probe Integrated with a Strip Line Magic-T

Design and Characterization of a Multi-Processed Differential Magnetic Field Probe by Using Asymmetric Calibration Method

A Simple High-resolution Near-field Probe for Microwave Non-Destructive Test and Imaging