Abstract:MBU is an increasing challenge in SRAM memory, due to the chip's large area of SRAM, and supply power scaling applied to reduce static consumption. Powerful ECCs can cope with random MBUs, but at the expense of complex encoding/decoding circuits, and high memory redundancy. Alternatively, radiation-hardened cell is an alternative technique that can mask single or even double node upsets in the same cell, but at the cost of increasing the overhead of the memory array. The idea of this work is to combine both techniques to take advantage of their respective strengths. To reduce redundancy and encoder/decoder overheads, SEC Hamming ECC has been chosen. About hardened cells, well-known and robust DICE cells, able to tolerate one node upset, have been used. To assess the proposed technique, we have measured the correction capability after a fault injection campaign, as well as the overhead (redundancy, area, power, and delay) of memory and encoding/decoding circuits. Results show high MBU correction coverages with an affordable overhead. For instance, for very harmful 8-bit random MBUs injected in the same memory word, more than 80% of the cases are corrected. Area overhead values of our proposal, measured with respect to double and triple error correction codes, are less than x1.45. To achieve the same correction coverage only with ECCs, redundancy, and overhead would be much higher.

SET Tolerable SRAM Hardened by DMR Circuit with Feedback-Split-Gate Voter and High-Speed Hierarchical Structure

An SET Hardened Dual-Modular Majority Voter Circuit for TMR System

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

Radiation-Hardened SRAM for Dynamic Voltage Frequency Systems

Single-Event-Transient Resilient Memory for DSP in Space Applications

Radiation Hardened 12T SRAM with Crossbar-Based Peripheral Circuit in 28nm CMOS Technology

Performance Improvements by SL-Current Limiter and Novel Programming Methods on 16MB RRAM Chip

A Hybrid Technique Based on ECC and Hardened Cells for Tolerating Random Multiple-Bit Upsets in SRAM Arrays

Design of Highly Reliable 14T and 16T SRAM Cells Combined with Layout Harden Technique

Radiation-Hardened 14T SRAM Bitcell with Speed and Power Optimized for Space Application

A 512 Kb SRAM in 65nm CMOS with Divided Bitline and Novel Two-Stage Sensing Technique

The single event upset hardened design of spin transfer torque magnetic random access memory read circuits at 40 nm technology

Zero-Hardened SRAM Cells to Improve Soft Error Tolerance in FPGA

SEDONUT: A Single Event Double Node Upset Tolerant SRAM for Terrestrial Applications

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

Self-heating Effect on Logic Performance of 6T-SRAM Based on CFET Device

An Ultra-Dynamic Voltage Scalable (U-DVS) SRAM Design

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology

A highly stable and low‐cost 12T radiation hardened SRAM cell design for aerospace application

Bit-Interleaving-Enabled 8t Sram with Shared Data-Aware Write and Reference-Based Sense Amplifier

A 16kbyte SRAM Memory Containing Peripheral Circuit Hardened