Abstract:InGaN-based visible LEDs find commercial applications for solid-state lighting and displays, but lattice mismatch limits the thickness of InGaN quantum wells that can be grown on GaN with high crystalline quality. Since narrower wells operate at a higher carrier density for a given current density, they increase the fraction of carriers lost to Auger recombination and lower the efficiency. The incorporation of boron, a smaller group-III element, into InGaN alloys is a promising method to eliminate the lattice mismatch and realize high-power, high-efficiency visible LEDs with thick active regions. In this work we apply predictive calculations based on hybrid density functional theory to investigate the thermodynamic, structural, and electronic properties of BInGaN alloys. Our results show that BInGaN alloys with a B:In ratio of 2:3 are better lattice matched to GaN compared to InGaN and, for indium fractions less than 0.2, nearly lattice matched. Deviations from Vegard's law appear as bowing of the in-plane lattice constant with respect to composition. Our thermodynamics calculations demonstrate that the solubility of boron is higher in InGaN than in pure GaN. Varying the Ga mole fraction while keeping the B:In ratio constant enables the adjustment of the (direct) gap in the 1.75-3.39 eV range, which covers the entire visible spectrum. Holes are strongly localized in non-bonded N 2p states caused by local bond planarization near boron atoms. Our results indicate that BInGaN alloys are promising for fabricating nitride heterostructures with thick active regions for high-power, high-efficiency LEDs.

A comparative study of AlGaN and BAlGaN based ultraviolet quantum well-based light emitting diodes

Graphene/p-AlGaN/p-GaN Electron Tunnelling Light Emitting Diodes with High External Quantum Efficiency

Advantages of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes with an Al-composition Graded Quantum Barrier.

Design of deep ultraviolet light-emitting diodes with staggered AlGaN quantum wells

BAlGaN alloys nearly lattice-matched to AlN for efficient UV LEDs

The marvelous optical performance of AlGaN-based deep ultraviolet light-emitting diodes with AlInGaN-based last quantum barrier and step electron blocking layer

Performance improvement of AlGaN-based deep-ultraviolet light-emitting diodes via asymmetric step-like AlGaN quantum wells

BInGaN alloys nearly lattice-matched to GaN for high-power high-efficiency visible LEDs

Efficiency and radiative recombination rate enhancement in GaN/AlGaN multi-quantum well-based electron blocking layer free UV-LED for improved luminescence

Review on the Progress of AlGaN-based Ultraviolet Light-Emitting Diodes

Advantages of AlGaN Tunnel Junction in N-Polar 284nm Ultraviolet-B Light Emitting Diode

High-Performances AlGaN-based DUV-LED via Under-Level Multiple Quantum Well Configuration

A design and comparative investigation of graded AlxGa1 − x N QB for W-Al0.58GaN/W-Al0.64–0.58 GaN DUV laser diode on AlN substrate

Improved Performance of Electron Blocking Layer Free AlGaN Deep Ultraviolet Light-Emitting Diodes Using Graded Staircase Barriers

Effect of Highly Doped p-AlGaN Layer to Improve the Ultimate Performance Parameters of 275 nm AlGaN-based UV-C LED

AlGaN-Based Deep UV Laser Diodes without an Electron Blocking Layer and with a Reduced Aluminum Composition of Quantum Barriers

Replication Advancements Review in Ultraviolet GaN/AlGaN Quantum Well Light Emitting Diodes: Engineering, Simulation and Validation

Performance Improvement of InGaN LEDs by Using Strain Compensated Last Quantum Barrier and Electron Blocking Layer

Polarization Modulation at Last Quantum Barrier for High Efficiency AlGaN-Based UV LED

Enhanced Performance of an AlGaN-Based Deep-Ultraviolet LED Having Graded Quantum Well Structure

Polarization Engineered p-Type Electron Blocking Layer Free AlGaN Based UV-LED Using Quantum Barriers with Heart-Shaped Graded Al Composition for Enhanced Luminescence