Abstract:Quartz Crucibles with large sizes are widely used in the production of rods for monocrystalline silicon in photovoltaic industry. Defects on the inner surface of aspheric crucibles should be removed at a high material removal rate (MRR), and atomic surface is strictly demanded. This is a challenge for chemical mechanical polishing (CMP), because of that CMP is usually applied to flat surface, rather than aspheric surface. Furthermore, traditional CMP normally employs noxious slurries, resulting in the potential pollution to the environment. To solve these challenges, a novel green CMP was developed, containing ceria, ytterbia, hydrogen peroxide, guar gum, potassium carbonate and disodium ethylenediamine tetraacetate. After CMP, atomics surface was achieved with surface roughness Sa of 0.122 nm at a measurement area of 100 x 100 mu m2, and the MRR is 31.56 mu m/h. Thickness of damaged layer is only 2.55 nm confirmed by transmission electron microscopy (TEM), which is the lowest value compared with those published previously. The developed CMP was applied to aspheric crucibles with a diameter of 810 mm, thickness of 15 mm and height of 580 mm. The surface roughness Sa of 0.361 nm was obtained, which is one order of magnitude lower than 2.648 nm through conventional mechanical polishing. Molecular dynamics (MD) simulations of nanoindentation and nanoscratch reveal that damaged layer was formed by densification of atoms at the surface. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy elucidate the mechanisms of developed green CMP. The content of trivalent Ce3+ increases, through the reduction of hydrogen peroxide and induction of trivalent oxides of rare earths, such as ceria and ytterbia. Experimental results confirm that content of Ce3+ was enhanced to 37.75 %, and the MRR was improved about 54.77 %. During CMP, a soft silicate layer was generated, which is easy to be removed by abrasives of rare earth oxides. At the same time, Ce-O-Si groups were formed via the dehydration and condensation between Si-OH and Ce-OH groups. The two -OH groups were formed by hydroxylation during CMP, and Ce-O-Si groups could be removed easily. With the coupling between chemical and mechanical functions, atomic surface was achieved at a high MRR. Our findings provide new insights to produce atomic surface on aspheric quartz crucibles with large sizes at a high MRR, which is beneficial for photovoltaic industry.

Atomic Surface of Fused Silica and Polishing Mechanism Interpreted by Molecular Dynamics and Density Functional Theory

Novel Green Chemical Mechanical Polishing of Fused Silica Through Designing Synergistic CeO2/h-BN Abrasives with Lubricity

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

Atomic-scale surface of fused silica induced by chemical mechanical polishing with controlled size spherical ceria abrasives

Angstrom surface with high material removal rate for quartz glass induced by silk dissolved novel green chemical mechanical polishing

Atomic Surface of Silicon Wafers Induced by Grafted Silica Nanoparticles and Sodium Carbonate

Development of Core–shell SiO2@A-TiO2 Abrasives and Novel Photocatalytic Chemical Machinal Polishing for Atomic Surface of Fused Silica

Atomic Surface on Fused Silica Induced by Novel Green Photochemical Mechanical Polishing

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Atomic Level Surface on Aspheric Quartz Crucible with Large Sizes Induced by Developed Green Chemical Mechanical Polishing with Composite Rare Earth Oxides

A Novel Green CeO2 Polishing Slurry and Its Chemical Mechanical Action Mechanism for Achieving Atomic-Level Smoothing of Fused Silica Glass Surfaces

Atomic-scale Planarization Surface of Quartz Glass Induced by Novel Green Chemical Mechanical Polishing Using Three Ingredients

Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishing

Atomic surface of diamond induced by novel green photocatalytic chemical mechanical polishing with high material removal rate

Close Atomic Surface on Aluminum Alloy Using Green Chemical Mechanical Polishing with Synergistic Effect Between Yttria and Silica Abrasives

Development of Mesoporous Abrasives and Its Unprecedented Polishing Performance Elucidated by a Novel Atomic Model

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing