Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Numerical Simulation of the Mechanical Behavior of Superconducting Tape in Conductor on Round Core Cable Using the Cohesive Zone Model

Numerical Study on Mechanical Properties of Conductors on Round Core Cables

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Performance Degradation of Multi-Layer Spiral Cable During Manufacturing Procedure

Analysis of Mechanical Properties of Each Layer of Superconducting Tape of Multi-Layer CORC Cable under Transverse Compression Load

Experimental Study on the Critical Current of CORC Cable under Cyclic Bending-straightening

Mechanical Response of Conductor on Round Core (CORC) Cables Under Electromagnetic Force

Deformation and crack prediction of CORC cable induced by Poisson effect: Theoretical modeling and experimental validation

Electromagnetic and Mechanical Properties of CORC Cable Due to Screening Current

Experimental Study on Cabling Properties of Different REBCO Coated Tapes

Study on Torsion Behavior of Superconducting Conductor on Round Core Cable

Experimental Study on Critical Current of Bent ReBCO Tapes in CORC Type Cable

3D quench modeling based on T-A formulation for high temperature superconductor CORC cables

Bending performance analysis on YBCO cable with high flexibility

Mechanical behavior of HTS tape in highly flexible REBCO cable under tensile and torsional loads

Strain Distribution and Critical Current Characteristics of an Individual REBCO Tape and Quasi-Isotropic Superconducting Strand Under Bending Loads by the Layerwise Theory

Current Sharing in Superconducting REBCO Cables-FEM Modeling

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Study on Performance Degradation of Multi-Layer Spiral Superconducting Cable Under Bending Load

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Electromechanical degradation of REBCO coated conductor tapes under combined tension and torsion loading