Abstract:The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based reconstruction method, was used to map part of a dual-phase steel alloy sample. To assess the resulting microstructures that were produced by the DCT technique, an EBSD map was collected within the same sample volume. To identify the 2D slice of the 3D DCT reconstruction that best corresponded to the EBSD map, a novel registration technique based solely on grain-averaged orientations was developed -- this registration technique requires very little a priori knowledge of dataset alignment and can be extended to other techniques that only recover grain-averaged orientation data such as far-field 3D X-ray diffraction microscopy. Once the corresponding 2D slice was identified in the DCT dataset, comparisons of phase balance, grain size, shape and texture were performed between DCT and EBSD techniques. More complicated aspects of the microstructural morphology such as grain boundary shape and grains less than a critical size were poorly reproduced by the DCT reconstruction, primarily due to the difference in resolutions of the technique compared with EBSD. However, lab-based DCT is shown to accurately determine the centre-of-mass position, orientation, and size of the large grains for each phase present, austenite and martensitic ferrite. The results reveals a complex ferrite grain network of similar crystal orientations that are absent from the EBSD dataset. Such detail demonstrates that lab-based DCT, as a technique, shows great promise in the field of multi-phase material characterization.

EBSD Technique,geometric Crystallography and Materials Science

Application of EBSD Technique to the Microtexture Analyses

Some Applications of Electron Back Scattering Diffraction (EBSD) in Materials Research

EBSD Analysis Technology and Its Application in Iron and Steel

Application of EBSD Technique Combined with Back Scattered Electron Imaging in Material Science

THE ELECTRON BACK-SCATTER DIFFRACTION TECHNOLOGY AND ITS APPLICATION IN MATERIAL ANALYSIS

A review of the preparation methods and techniques of electron backscatter diffraction (EBSD) samples

A machine learning approach to map crystal orientation by optical microscopy

Application of EBSD to analyzing low strain level microstructure

ORIENTATION MAPPING:AN EFFECTIVE TECHNIQUE FOR REVEALING THE MORPHOLOGY, CRYSTALLOGRAPHIC STRUCTURE AND ORIENTATION OF CRYSTALLINE MATERIALS

A simple, static and stage mounted direct electron detector based electron backscatter diffraction system

Electron diffraction based techniques in scanning electron microscopy of bulk materials

A review of EBSD: from rudimentary on line orientation measurements to high resolution elastic strain measurements over the past 30 years.

Application of Atomic Resolution Energy Dispersive X-ray Spectroscopy in Advanced Functional Materials

Registration between DCT and EBSD datasets for multiphase microstructures

Micro-stress-strain analysis in materials based upon EBSD technique: a review

Rapid Electron Backscatter Diffraction Mapping: Painting by Numbers

EBSD studies on historical relics analysis and ancient artifact manufacturing processes

Correction of Electron Back-scattered Diffraction datasets using an evolutionary algorithm

Application of Electron Back Scattering Diffraction in Facet Crystalline Orientation Analysis

Extensions of Electron Diffraction Based Techniques in Crystallographic Characterization