Abstract:Three-dimensional (3D) free-standing nanostructures have potential applications in many fields with extremely high patterning resolution and design flexibility with direct writing. In numerous Electron Beam Lithography (EBL) processes designed for the creation of three-dimensional structures, the multilayer resist system is pivotal due to its adaptability in design. Nevertheless, the compatibility of solvents between different layers of resists often restricts the variety of feasible multilayer combinations. This paper introduces an innovative approach to address the bottleneck issue by presenting a novel concept of multilayer resist dry stacking, which is facilitated by a near-zero adhesion strategy. The PMMA film is stacked onto the HSQ resist using a dry peel and release technique, effectively circumventing the issue of HSQ solubilization by PMMA solvents typically encountered during conventional spin-coating procedures. Simultaneously, a dry lift-off technique can be implemented by eschewing the use of organic solvents during the wet process. This pioneering method enables the fabrication of high-resolution 3D free-standing plasmonic nanostructures and intricate 3D free-standing nanostructures. Finally, this study presents a compelling proof of concept, showcasing the integration of 3D free-standing nanostructures, fabricated via the described technique, into the realm of Fabry-Perot cavity resonators, thereby highlighting their potential for practical applications. This approach is a promising candidate for arbitrary 3D free-standing nanostructure fabrication, which has potential applications in nanoplasmonics, nanoelectronics, and nanophotonics.

Fabrication and Application of a Novel Freestanding Stencil Bi-Material Cantilever Structure

Fabrication of SiO $_{2}$ Microcantilever Using Isotropic Etching With ICP

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Fabrication of nanoscale stencils through focused ion beam milling and dry transfer of silicon-on-nothing membrane with perforations

Utilization of Resist Stencil Lithography for Multidimensional Fabrication on a Curved Surface

Fabricating 3D Metastructures by Simultaneous Modulation of Flexible Resist Stencils and Basal Molds

Study of residual stress-induced deformation of multilayer cantilever for maskless microplasma etching

3 DOF Noncontact Clamping Stage for Micro-Stereolithography on Embedded Material

Nanoimprint Lithography for the Fabrication of Interdigitated Cantilever Arrays

Simulation and experiments of intrinsic bending of multilayer microcantilever for maskless scanning plasma etching

Bimaterial Cantilever Focal Plane Array for Uncooled Infrared Imaging Using Sandwich-Framed Structure

Bimaterial micro-cantilever uncooled infrared imaging system-design and fabrication of micro-cantilever array

A New Structure of Cantilever-Based Infrared Focal-Plane Array

The Hybrid Fabrication Process of Metal/Silicon Composite Structure for MEMS S&A Device.

Two-step MEMS microfabrication via 3D direct laser lithography

Fabrication of Nano-Electromechanical Structures Down to 20 nm by Spacer Technology

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Reliable fabrication of 3D freestanding nanostructures via all dry stacking of incompatible photoresist

Laminated Photoresist Sacrificial Layer Process for 3-D Movable Suspension Microstructures in LIGA-Based Surface Micromachining

Fabrication of monolithic integrated bimaterial resonant uncooled IR sensor

Stencil Printing of Liquid Metal upon Electrospun Nanofibers Enables High-Performance Flexible Electronics