Abstract:The heat pipe cooled reactor is an advanced reactor design which is nearly solid-state with an array of in-core heat pipes for passive heat transfer. The local heat pipe failure probability is certainly high over the reactor lifetime. Therefore, the reactor design must include consideration of heat pipe failure accidents which needs to be explored in-depth. The Monte Carlo neutron transport code RMC was used with the general finite element analysis software ANSYS Mechanical to analyze the thermal/mechanical characteristics of a megawatt heat pipe cooled reactor for both normal and heat pipe failure conditions. The simulations were verified against a previous study with the predicted temperature distributions being consistent with each other with an absolute error of less than 3 K. Further analyses show that a 2-D model simulation can also well represent the 3-D model for heat pipe failure accident analyses. Sterbentz et al. (2017) simplified the heat pipe model with a constant temperature boundary condition along the evaporator wall of 950.15 K regardless of the heat load or heat pipe operating temperature. Therefore, a heat pipe subroutine was added to the codes to predict the heat pipe temperatures during a heat pipe failure accident. The results show that the heat pipe failure will cause larger temperature rises and stress concentrations. The heat pipe wall temperatures in the core differ from each other with the differences between the heat pipe loads during normal heat pipe operation and with failures reflecting the local effect of the heat pipe failures. The operating conditions far from the failure area are little affected (<20 K temperature change) by a single heat pipe failure. The effects of the heat pipe failure on the reactor core reactivity and local power distribution were also analyzed with a reactivity change of less than 5 pcm and a local power change of less than 0.1%. Therefore, the heat pipe failure can be analyzed in steady-state simulations with unchanged power distributions. (C) 2020 Elsevier Ltd. All rights reserved.

Preliminary Analysis of the Thermal-Hydraulic Behavior Induced by First Wall Coolant Pipe Leakage Accidents for ITER

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Thermal fatigue failure behavior on Be/Cu joint of ITER first wall after enhanced heat flux test

Failure analysis of Be/Cu joint in ITER first wall mock-ups

Progress in Thermohydraulic Analysis of Accident Scenarios of A Water-Cooled Fusion Demo Reactor

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Thermofluid experiments on ingress of coolant event

Experimental and Numerical Studies on Heat Transfer and Fluid Flow Characteristics in A Vacuum Vessel of Fusion Reactor after the Loss-Of-Vacuum-Events Occurred

Force and moment analysis of pipe system for double end break loss of coolant accident in primary loop of PWR

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

Analysis and Experimental Results on Ingress of Coolant Event in Vacuum Vessel

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Comprehensive Safety Analysis Code System for Nuclear Fusion Reactors III: Ex-Vessel LOCA Analyses Considering Passive Safety

Heat pipe failure accident analysis in megawatt heat pipe cooled reactor

Safety scenario and integrated thermofluid test

Effects of breach area and length to exchange flow rates under the LOVA condition in a fusion

Effect of Coolant Water Temperature of Emergency Core Cooling System on Failure Probability of Reactor Pressure Vessel

ICONE19-43276 Preliminary Study on In-Vessel Retention in Large-Scale Advanced PWR

Analysis of an in-service rupture of the Inner First Wall of Tore Supra

Thermo-Mechanical Analysis of Instrumentation Guide Tube Failure During a Severe Accident in a Nordic Boiling Water Reactor