Abstract:Conductive polymer nanotubules of 1,2-diaminobenzene (1,2-DAB) were prepared using a porous polycarbonate membrane template, placed on a Pt foil and used to support the polymer, then, the electropolymerisation was performed by chronocoulometry. The obtained conductive polymer nanostructures were then placed on Pt electrode and used to support highly dispersed prussian blue (PB), which acts as the active component for H2O2 detection. The observed good stability of PB as catalyst of H2O2 was related to the presence of organic non-conventional conducting polymers in a composite nanostructured film. These nanostructured polymer/PB composite films were also characterised by scanning electron microscopy (SEM) and Raman spectroscopy. The non-conventional conducting polymer nanotubules/PB modified Pt electrodes were tested by cyclic voltammeter for stability at different pH values, then, by amperometry, for hydrogen peroxide, ascorbic acid, acetaminophen, uric acid and acetylcholine. Glucose oxidase (GOD), lactate oxidase (LOD), L-amino acid oxidase (L-AAOD), alcohol oxidase (AOD), glycerol-3-phosphate oxidase (GPO), lysine oxidase (LyOx), and choline oxidase (ChOx) were immobilised on PB layer supported on 1,2-diaminobenzene (1,2-DAB) nanotubules onto the Pt electrodes. Different strategies for enzyme immobilisation were performed and used. Analytical parameters such as reproducibility, interference rejection, response time, storage and operational stability of the sensors have been studied and optimised. Results provide a guide to design high sensitive, stable and interference-free biosensors. The glucose biosensors assembled with nanostructured poly(1,2-DAB) showed a detection limit of 5 x 10(-5) mol l(-1), a wide linearity range (5 x 10(-5) to 5 x 10(-3) mol l(-1)), a high selectivity, a stability of 3 months at 4 degrees C, and at least 4 weeks at room temperature. Similar analytical parameters and stability were also studied for L-(+)-lactic acid, L-leucine, ethanol, glycerol-3-phosphate, lysine, and choline biosensors.

Enhancement of the Sensitivity and Selectivity of Oxidation of H 2 O 2 on Platinum Wire at Low Working Potential by Platinization and Covering of Heteropolypyrrole Film for Amperometric Micro-Biosensor Construction

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Improvement of the Performance of H2O2 Oxidation at Low Working Potential by Incorporating TTF-TCNQ into a Platinum Wire Electrode for Glucose Determination.

Interference free platinum wire glucose biosensors based on covering nonconductive substituted heteropolypyrrole film

Amperometric Sensor for Glucose and Hypoxanthine Based on a PdIrO(2) Modified Electrode by a Co-Crosslinking Bienzymic System.

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

Amperometric Glucose Sensor Based on Coimmobilization of Glucose Oxidase and Poly(p-phenylenediamine) at a Platinum Microdisk Electrode

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

An Amperometric Biosensor for Glucose Based on Electrodeposited Redox Polymer/Glucose Oxidase Film on a Gold Electrode

Durable Hydrogen Peroxide Biosensors Based on Polypyrrole-Decorated Platinum/Palladium Bimetallic Nanoparticles

A Sensitive and Selective Biosensor Activated by Tailor-Designed Platinum Nanoparticles Electrodeposited Onto A Gold Microelectrode

Self-Interconnecting Pt Nanowire Network Electrode for Electrochemical Amperometric Biosensor

Pt based enzyme electrode probes assembled with Prussian Blue and conducting polymer nanostructures

Immobilization of Hemoglobin on Platinum Nanoparticles-Modified Glassy Carbon Electrode for H2O2 Sensing

Novel Enzymeless Glucose Sensor Based On Overoxidized Polypyrrole Modified Nickel Microelectrode

Amperometric glucose sensor based on glucose oxidase immobilized in electrochemically generated poly(ethacridine)

The Application Of Platinum Modified Superfine-Fibrous Polyaniline In Glucose Biosensors

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.

A promising biosensing-platform based on bismuth oxide polycrystalline-modified electrode: characterization and its application in development of amperometric glucose sensor.