Abstract:A micro-biosensor was constructed by incorporating the organic conducting salt tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ) into a platinized platinum (Pt) wire and further covering with the electrochemical polymerical heteropolypyrrole film, in which glucose oxidase (GOx) was entrapped. The enzyme electrode can sensitively determine glucose at a low working potential, mainly based on the oxidation of H2O2. The incorporated TTF-TCNQ can significantly improve the oxidation of H2O2 on the electrode, although a part of the TTF-TCNQ functions as a mediator. Compared with the same electrode prepared without TTF-TCNQ incorporated, the TTF-TCNQ modified electrode had better performance characteristics at a working potential of 200 mV (versus SCE). The response time to 90% of the steady value was shortened from about 40 s to less than 10 s, the lower limit of the linear response was greatly extended from about 1.6 mM to 10 mu M, the linear range was shifted from 1.6-10.0 to 0.01-5 mM and the sensitivity was increased from about 1 to 1.5 mu A/mM. The electrode was quite stable. For continuous operation, the electrode could work for about 5 weeks and only lost 60% of its original sensitivity. Stored at 4 degrees C for intermittent determinations, the electrode kept 80% sensitivity for over 6 months. Due to covering the electrode with a non-conductive heteropolypyrrole film, ascorbate, urate and 4-acetamidophenol caused only negligible current response at an applied potential of 200 mV. (C) 1999 Elsevier Science S.A. All rights reserved.

Interference free platinum wire glucose biosensors based on covering nonconductive substituted heteropolypyrrole film

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

An antifouling zwitterionic coating via electrochemically mediated ATRP on enzyme-based glucose sensors for long-time stability in 37°C serum.

Antifouling Zwitterionic Coating Via Electrochemically Mediated Atom Transfer Radical Polymerization on Enzyme-Based Glucose Sensors for Long-Time Stability in 37 °C Serum.

Antifouling Zwitterionic Coating Via Electrochemically Mediated Atom Transfer Radical Polymerization On Enzyme-Based Glucose Sensors For Long-Time Stability In 37 Degrees C Serum

Enhancement of the Sensitivity and Selectivity of Oxidation of H 2 O 2 on Platinum Wire at Low Working Potential by Platinization and Covering of Heteropolypyrrole Film for Amperometric Micro-Biosensor Construction

Improved Sensitivity and Selectivity Glucose Biosensor Based on PANI-GRA Nanocomposite Film Decorated with Pt Nanoparticles

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

Improved Selectivity and Stability of Glucose Biosensor Based on in Situ Electropolymerized Polyaniline-Polyacrylonitrile Composite Film.

Highly Selective and Stable Glucose Biosensor Based on Incorporation of Platinum Nanoparticles into Polyaniline-Montmorillonite Hybrid Composites

Polyaniline–polyisoprene composite film based glucose biosensor with high permselectivity

Glucose Biosensor Based on the Highly Efficient Immobilization of Glucose Oxidase on Prussian Blue-Gold Nanocomposite Films

Glucose biosensor based on platinum nanowire array

A polypyrrole-modified planar glucose sensor

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

Amperometric Biosensor for Glucose Based on Electropolymerized Tetraaminophthalocyanatocobalt(Ii) and Phenol Films

Improvement of the Performance of H2O2 Oxidation at Low Working Potential by Incorporating TTF-TCNQ into a Platinum Wire Electrode for Glucose Determination.

A High-Sensitive and Fast-Fabricated Glucose Biosensor Based on Prussian Blue/topological Insulator Bi2Se3 Hybrid Film