Abstract:The Schockley–Quisser (SQ) limit of 28.64% is distant from the Sb 2 S 3 solar cells' record power conversion efficiency ( PCE ), which is 8.00%. Such poor efficiency is mostly owing to substantial interface-induced recombination losses caused by defects at the interfaces and misaligned energy levels. The endeavor of this study is to investigate an efficient Sb 2 S 3 solar cell structure via accurate analytical modeling. The proposed model considers different recombination mechanisms such as non-radiative recombination, Sb 2 S 3 /CdS interface recombination, Auger, SRH, tunneling-enhanced recombination, and their combined impact on solar cell performance. This model is verified against experimental work (Glass/ITO/CdS/Sb 2 S 3 /Au) where a good coincidence is achieved. Several parameters effects such as thickness, doping, electronic affinity, and bandgap are scrutinized. The effect of both bulk traps located in CdS and Sb 2 S 3 on the electrical outputs of the solar cell is analyzed thoroughly. Besides, a deep insight into the effect of interfacial traps on solar cell figures of merits is gained through shedding light into their relation with carriers' minority lifetime, diffusion length, and surface recombination velocity. Our research findings illuminate that the primary contributors to Sb 2 S 3 degradation are interfacial traps and series resistance. Furthermore, achieving optimal band alignment by fine-tuning the electron affinity of CdS to create a Spike-like conformation is crucial for enhancing the immunity of the device versus the interfacial traps. In our study, the optimized solar cell configuration (Glass/ITO/CdS/Sb 2 S 3 /Au) demonstrates remarkable performance, including a high short-circuit current ( J SC ) of 47.9 mA/cm 2 , an open-circuit voltage ( V OC ) of 1.16 V, a fill factor ( FF ) of 54%, and a notable improvement in conversion efficiency by approximately 30% compared to conventional solar cells. Beyond its superior performance, the optimized Sb 2 S 3 solar cell also exhibits enhanced reliability in mitigating interfacial traps at the CdS/Sb 2 S 3 junction. This improved reliability can be attributed to our precise control of band alignment and the fine-tuning of influencing parameters.

Preparation and Characterization of Sb2S3 Thin Films for Planar Solar Cells Via Close Space Sublimation Method

Orientation control of close-spaced sublimation processed Sb2S3 thin films for efficient and stable planar solar cells

Self-assembled growth of quasi-vertically oriented Sb2S3 thin films for substrate structured solar cells

Grain Engineering of Sb2S3 Thin Films to Enable Efficient Planar Solar Cells with High Open‐Circuit Voltage

Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth

Comparison of one and two-stage growth approaches for close space sublimation deposition of Sb 2 Se 3 thin film solar cells

Solution‐Processed Compact Sb 2 S 3 Thin Films by a Facile One‐Step Deposition Method for Efficient Solar Cells

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Enhanced Performance of Close-Spaced Sublimation Processed Antimony Sulfide Solar Cells via Seed-Mediated Growth

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Synthesis and Characterization of Hydrazine Solution Processed Cu12Sb4S13 Film

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Controllable (h k 1) preferred orientation of Sb2S3 thin films fabricated by pulse electrodeposition

Fabrication of Homogenous Sb 2 (S,Se) 3 Solar Cells by Close Space Sublimation Using a Single Alloyed Powder Source

Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity

Quasi-Vertically Oriented Sb 2 Se 3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 mV Prepared via Close-Space Sublimation and Selenization

Controlling the Intermediate Phase to Improve the Crystallinity and Orientation of Cs3Sb2ClxI9‐x Films for Efficient Solar Cells

Scrutinizing transport phenomena and recombination mechanisms in thin film Sb2S3 solar cells