Abstract:Sb2S3 is a promising environmentally‐friendly semiconductor for stable and high efficiency thin film solar cells, but, like many other polycrystalline materials, is limited by non‐radiative recombination and carrier scattering by grain boundaries. Herein, we show how the grain boundary density in Sb2S3 films can be significantly reduced from 1068±40 nm μm−2 (largest grain ∼5 μm) to 327±23 nm μm−2 (largest grain >15 μm) by incorporating an appropriate amount of Ce3+ into the precursor solution for Sb2S3 deposition. Through extensive characterization of the structural, morphological and optoelectronic properties, complemented with computations, we reveal the underlying mechanisms responsible for the increased grain size and improved photovoltaic performance of Sb2S3 solar cells. A critical factor behind the reduction in grain boundary density is the formation of an ultrathin layer of Ce2S3 at the CdS/Sb2S3 interface, which could reduce the interfacial energy and increase the adhesion work between Sb2S3 and the substrate to encourage heterogeneous nucleation of Sb2S3, as well as increase the rate of grain growth. Through a reduction in non‐radiative recombination at grain boundaries and/or the CdS/Sb2S3 heterointerface as well as improved charge‐carrier transport properties at the heterojunction, we achieved high performance Sb2S3 solar cells with a power conversion efficiency reaching 7.66%, and an open‐circuit voltage (VOC) of 796 mV. This VOC is the highest reported thus far for Sb2S3 solar cells. This work provides a strategy to simultaneously regulate the nucleation and growth of Sb2S3 absorber films via in‐situ chemical environment tuning, which can be more broadly applied to other thin film systems to improve their photovoltaic performance. This article is protected by copyright. All rights reserved

Comparison of one and two-stage growth approaches for close space sublimation deposition of Sb 2 Se 3 thin film solar cells

Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Orientation control of close-spaced sublimation processed Sb2S3 thin films for efficient and stable planar solar cells

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Self-assembled growth of quasi-vertically oriented Sb2S3 thin films for substrate structured solar cells

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Grain Engineering of Sb2S3 Thin Films to Enable Efficient Planar Solar Cells with High Open‐Circuit Voltage

Enhanced Performance of Close-Spaced Sublimation Processed Antimony Sulfide Solar Cells via Seed-Mediated Growth

Fabrication of Homogenous Sb 2 (S,Se) 3 Solar Cells by Close Space Sublimation Using a Single Alloyed Powder Source

Theoretical studies on surface kinetics and growth properties of Sb<sub>2</sub>Se<sub>3</sub> and Sb<sub>2</sub>S<sub>3</sub>

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Growth and Characterization of p-Type and n-Type Sb2Se3 for Use in Thin-Film Photovoltaic Solar Cell Devices

Nanorod array-induced growth of high-quality Sb2Se3 absorber layers for efficient planar solar cells

Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation

Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Realization of High Photovoltaic Efficiency Devices With Sb2S3 Absorber Layer