Abstract:Laser-induced damage of high reflection (HR) coatings, working at near ultraviolet (NUV) and near infrared (NIR) regions was investigated. For NIR HR coatings, the nodules still remain the most limiting defects. The E-field intensity (EFI) enhancement in nodules plays a central role for triggering laser-induced damage. We established a simple model for EFI enhancement in nodules using the focusing and light penetrating concept. With the help of finite-difference time domain (FDTD) simulations, we found that refractive indices and nodular geometries affected the focal length as well as the size of focal spots. Furthermore, the angular reflection bandwidth (ARB) of nodules determined the fraction of light that can penetrate to the focal region. For NUV HR coatings, we explored the increase of the laser-induced damage threshold (LIDT) by increasing the incident angle from 0 degrees to 65 degrees for S-polarization. The EFI in a 65 degree HR coating is more than 4 times lower compared to 0 degree HR coatings, which suggests that the LIDT of 65 degree HR coating is much higher compared to 0 degree HR coating. However, we found some contradictory results. For small testing laser beam size with a diameter of 20 mu m, the LIDT of 65 degree HR coating is 3.5 times higher compared to a 0 degree HR coating. However, for a large sized testing laser beam with a diameter of 1000 mu m, the LIDT of 65 degree HR coating is 2 times lower compared to a 0 degree HR coating. Possible reasons for the observed damage phenomena are discussed.

Investigation on Nano-Absorbing Precursors in the Picosecond Regime Via the Comparative Study of HfO2/SiO2 and Ta2O5/SiO2 High-Reflectivity Coating Damage

Nanosecond pulsed laser damage characteristics of HfO2/SiO2 high reflection coatings irradiated from crystal-film interface.

Characterization of Laser Induced Damage of HR Coatings with Picosecond Pulses

Role of Nano-Precursors in Ultraviolet-Laser Damage of HfO2/SiO2 Mixture Coatings

Femtosecond Laser-Induced Damage and Ultrafast Dynamics in Highs Reflection Coating

Effect of nanosecond laser pre-irradiation on the femtosecond laser-induced damage of Ta2O5/SiO2 high reflector

Laser Induced Pits in Optical Coatings

Study of Laser Induced Damage of High Reflector at 1064 Nm

Investigating the material properties of HfO2/SiO2-based anti-reflection coatings during 1064 nm laser-induced breakdown in air and vacuum conditions

Laser-induced Damage of TiO2∕SiO2 High Reflector at 1064Nm

Investigation on picosecond laser-induced damage in HfO 2 /SiO 2 high-reflective coatings

Nanosecond Laser-Induced Damage of High-Reflection Coatings: Nuv Through Nir

Interfacial Damage in a Ta_2O_5/SiO_2 Double Cavity Filter Irradiated by 1064 Nm Nanosecond Laser Pulses

Investigation of the High Repetition Rate Picosecond Laser Induced Damage Properties of Dielectric Reflective Optical Coatings

Comparative study of Laser induce damage of HfO2/SiO2 and TiO2/SiO2 mirrors at 1064 nm.

The Fatigue Effect of Femtosecond Laser-Induced Damage in High-Reflective Coatings at Low Repetition Rate

Investigation on the Laser-induced Damage Morphology of HfO2/SiO2 Antireflection Films

Growth of laser-induced damage in HfO2/SiO2 multilayer hr coatings at 532nm

Laser Damage Properties of Broadband Low-Dispersion Mirrors in Sub-Nanosecond Laser Pulse.

The evolution of coating threshold damage to peeling off under femtosecond laser irradiation

Temporal Scaling Law and Intrinsic Characteristic of Laser Induced Damage on the Dielectric Coating