Publisher Correction: Effects of Porosity on Dynamic Indentation Resistance of Silica Nanofoam

Cang Zhao,Ying Zhong,Yu Qiao

DOI: https://doi.org/10.1038/s41598-018-35444-x

IF: 4.6

2018-01-01

Scientific Reports

Abstract:A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

What problem does this paper attempt to address?

Effects of Porosity on Dynamic Indentation Resistance of Silica Nanofoam

Cang Zhao,Ying Zhong,Yu Qiao

DOI: https://doi.org/10.1038/s41598-017-01152-1

IF: 4.6

2017-01-01

Scientific Reports

Abstract:The dynamic indentation behaviors of monolithic silica nanofoams of various porosities are investigated. When the pore size is on the nm scale, as the porosity increases, despite the decrease in mass density, the resistance offered by silica nanofoam to dynamic indentation is maintained at a high level, higher than the resistance of solid silica or regular porous silica. This phenomenon is related to the fast collapse of nanocells, which produces a locally hardened region and significantly increases the volume of material involved in impact energy dissipation.
Correction To: Finite Indentation of Pressurized Elastic Fluid Nanovesicles by a Rigid Cylindrical Indenter

Xingyi Tang,Jianxiang Wang,Xin Yi

DOI: https://doi.org/10.1007/s10338-019-00117-3

2019-01-01

Acta Mechanica Solida Sinica

Abstract:Unfortunately due to a typesetting mistake in the caption of figure 1, fourth line, l2 has been displayed wrongly as I2. The original article has been corrected.
Corrigendum to “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique”

Ziyu Mei,Yuqing Lu,Yuxin Lou,Ping Yu,Manlin Sun,Xin Tan,Junjing Zhang,Li Yue,Haiyang Yu

DOI: https://doi.org/10.1155/2021/9796816

2021-04-24

BioMed Research International

Abstract:[This corrects the article DOI: 10.1155/2021/6612840.].

biotechnology & applied microbiology,medicine, research & experimental
Correction to: A review on the flow instability of nanofluids

Jianzhong Lin,Hailin Yang

DOI: https://doi.org/10.1007/s10483-019-2572-9

2019-01-01

Applied Mathematics and Mechanics

Abstract:The article [A review on the flow instability of nanofluids], written by [Jianzhong LIN, Hailin YANG], was originally published Online First without Open Access. After publication in volume [40], issue [9], page [1227-1238] the author decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to © The Author(s) [2019] and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, duplication, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Fang‐Ze Li,Gen-Wen Hsieh,S. H. Dalal,Mary Newton,J.E. Stott,Pritesh Hiralal,Arokia Nathan,P. A. Warburton,Hüsnü Emrah Ünalan,Paul Beecher,Andrew J. Flewitt,Ian Robinson,G.A.J. Amaratunga,W. I. Milne

DOI: https://doi.org/10.1109/ted.2008.2010442

2009-01-01

Abstract:In our paper [F.M. Li et al., 2008], two errors were noticed after the paper went to press. On page 3002, near the middle of the left column, it should say "In this method, zinc oxide and carbon powders are mixed together, usually in a ZnO:C ratio of 1: 1 or 1:4 by weight." In Fig. 8, on page 3005, the x-axis label should say "energy (eV)" instead of "wavelength (eV)." Also, this paper should have been designated as Invited, as it is now above.
Author Correction: Nano-scale structure and mechanical properties of ASR products under saturated and dry conditions

Huite Wu,Jianwen Pan,Jinting Wang

DOI: https://doi.org/10.1038/s41598-020-69840-z

IF: 4.6

2020-07-28

Scientific Reports

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.

multidisciplinary sciences
Author Correction: Microscopic and mechanical properties of undisturbed and remoulded red clay from Guiyang, China

Yanzhao Zhang,Shaoyun Pu,Rita Yi Man Li,Jing Zhang

DOI: https://doi.org/10.1038/s41598-021-81993-z

IF: 4.6

2021-02-03

Scientific Reports

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.

multidisciplinary sciences
Correction: Sriseubsai et al. Robust Design of PC/ABS Filled with Nano Carbon Black for Electromagnetic Shielding Effectiveness and Surface Resistivity. Processes 2020, 8, 616

Wipoo Sriseubsai,Arsarin Tippayakraisorn,Jun Wei Lim

DOI: https://doi.org/10.3390/pr12112484

IF: 3.5

2024-11-09

Processes

Abstract:With this correction, the Editorial Office together with the authors are making the following amendments to the published article [...]

engineering, chemical
Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

J F Zhou,C Y Liu,K Z He,X X Wei

DOI: https://doi.org/10.1016/j.heliyon.2024.e28814

IF: 3.776

2024-03-30

Heliyon

Abstract:[This corrects the article DOI: 10.1016/j.heliyon.2024.e24428.].
Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Xiaopeng Wang,Xiaocheng Zhang,Ming Zhang,Qilong Zhang,Pinghua Dong,Haibo Ding,Xiaoqiang Liu

DOI: https://doi.org/10.1021/acsomega.4c06552

IF: 4.1

2024-08-21

ACS Omega

Abstract:[This corrects the article DOI: 10.1021/acsomega.3c08594.].
Correction: Ghanei et al. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215

Amir Ghanei,Faezeh Jafari,Mojdeh Mehrinejad Khotbehsara,Ehsan Mohseni,Waiching Tang,Hongzhi Cui

DOI: https://doi.org/10.3390/ma14113012

IF: 3.4

2021-06-02

Materials

Abstract:The authors regret that Figures 6 and 11b in [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Retracted: Preparation of Porous Ceramic Building Decoration Materials by Foaming Method and Research on Nanomechanical Properties

International Journal of Analytical Chemistry

DOI: https://doi.org/10.1155/2023/9897809

2023-11-30

International Journal of Analytical Chemistry

Abstract:This article has been retracted by Hindawi, as publisher, following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of systematic manipulation of the publication and peer-review process. We cannot, therefore, vouch for the reliability or integrity of this article.

chemistry, analytical
Erratum: Polozov, I., et al. Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders. Materials 2020, 13, 1766

Igor Polozov,Nikolay Razumov,Dmitriy Masaylo,Alexey Silin,Yuliya Lebedeva,Anatoly Popovich

DOI: https://doi.org/10.3390/ma13112630

IF: 3.4

2020-06-09

Materials

Abstract:The authors wish to make the following correction to this paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Correction to: Effects of nanocellulose formulation on physicomechanical properties of Aquazol–nanocellulose composites

Hsin-Chen Chen,William Tai Yin Tze,Feng-Cheng Chang

DOI: https://doi.org/10.1007/s10570-021-03742-9

IF: 6.123

2021-03-02

Cellulose

Abstract:In the original publication, the sentence "Similarly, CNFs resulted in a maximum improvement of 262% in the Young’s modulus value and 254% improvement in the σMax value (Table 2).

materials science, textiles,polymer science, paper & wood
Erratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints

Yangbing Cao,Yaoyao Zhang,Zhi Liu,Min Bao

DOI: https://doi.org/10.1007/s12205-024-7085-7

IF: 2.115

2024-07-26

KSCE Journal of Civil Engineering

Abstract:This erratum is published to notify a correction in Eq. (6).

engineering, civil
Correction: Exploring the Mpemba effect: a universal ice pressing enables porous ceramics

Xiaodan Yang,Yao Shan,Ying Hong,Zhuomin Zhang,Shiyuan Liu,Xiaodong Yan,Xuetian Gong,Guangzu Zhang,Zhengbao Yang

DOI: https://doi.org/10.1039/d3mh01869e

IF: 13.3

2024-03-20

Materials Horizons

Abstract:Correction for 'Exploring the Mpemba effect: a universal ice pressing enables porous ceramics' by Xiaodan Yang et al. , Mater. Horiz. , 2024, DOI: https://doi.org/10.1039/d3mh01869e.

materials science, multidisciplinary,chemistry
Publisher Correction: Solvent-assisted Programming of Flat Polymer Sheets into Reconfigurable and Self-Healing 3D Structures

Yang,Eugene M. Terentjev,Yen Wei,Yan Ji

DOI: https://doi.org/10.1038/s41467-018-04835-z

IF: 16.6

2018-01-01

Nature Communications

Abstract:The original version of this Article omitted the Received and Accepted dates; they should have been 21st January 2018 and 12th April 2018, respectively. This has been corrected in the PDF and HTML versions of the Article.
Publisher Correction: Semi-transparent graphite films growth on Ni and their double-sided polymer-free transfer

Geetanjali Deokar,Alessandro Genovese,Sandeep G. Surya,Chen Long,Khaled N. Salama,Pedro M. F. J. Costa

DOI: https://doi.org/10.1038/s41598-020-75524-5

IF: 4.6

2020-10-29

Scientific Reports

Abstract:An amendment to this paper has been published and can be accessed via a link at the top of the paper.

multidisciplinary sciences
Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Chunzi Zhang,Ozan Gunes,Yuanshi Li,Xiaoyu Cui,Masoud Mohammadtaheri,Shi-Jie Wen,Rick Wong,Qiaoqin Yang,Safa Kasap

DOI: https://doi.org/10.3390/ma13225132

IF: 3.4

2020-11-13

Materials

Abstract:The authors would like to correct a typographical error in their paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
A Discussion of “application of Nano-Indentation Methods to Estimate Nanoscale Mechanical Properties of Shale Reservoir Rocks” by K Liu, M Osatadhassan and B Bubach

Qiang Zeng,Ying Feng,Shilang Xu

DOI: https://doi.org/10.1016/j.jngse.2017.02.027

IF: 5.285

2017-01-01

Journal of Natural Gas Science and Engineering

Abstract:This paper presents a discussion on a recent article authored by Liu et al. [Application of nano indentation methods to estimate nanoscale mechanical properties of shale reservoir rocks, Journal of Natural Gas Science and Engineering 35 (2016) 1310-1319]. The authors may estimate the fracture stress intensity factor U-pp/U-t incorrectly by ignoring the effect of holding step in indentation load-displacement curves when evaluating the plastic-to-total energy ratio. We here proposed a new equation in which the holding step was considered. We obtained different values of fracture toughness of the shale samples. (C) 2017 Elsevier B.V. All rights reserved.

Publisher Correction: Effects of Porosity on Dynamic Indentation Resistance of Silica Nanofoam

Effects of Porosity on Dynamic Indentation Resistance of Silica Nanofoam

Correction To: Finite Indentation of Pressurized Elastic Fluid Nanovesicles by a Rigid Cylindrical Indenter

Corrigendum to “Determination of Hardness and Fracture Toughness of Y-TZP Manufactured by Digital Light Processing through the Indentation Technique”

Correction to: A review on the flow instability of nanofluids

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Author Correction: Nano-scale structure and mechanical properties of ASR products under saturated and dry conditions

Author Correction: Microscopic and mechanical properties of undisturbed and remoulded red clay from Guiyang, China

Correction: Sriseubsai et al. Robust Design of PC/ABS Filled with Nano Carbon Black for Electromagnetic Shielding Effectiveness and Surface Resistivity. Processes 2020, 8, 616

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Correction to "Proppant Settlement and Long-Term Conductivity Calculation in Complex Fractures"

Correction: Ghanei et al. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215

Retracted: Preparation of Porous Ceramic Building Decoration Materials by Foaming Method and Research on Nanomechanical Properties

Erratum: Polozov, I., et al. Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders. Materials 2020, 13, 1766

Correction to: Effects of nanocellulose formulation on physicomechanical properties of Aquazol–nanocellulose composites

Erratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints

Correction: Exploring the Mpemba effect: a universal ice pressing enables porous ceramics

Publisher Correction: Solvent-assisted Programming of Flat Polymer Sheets into Reconfigurable and Self-Healing 3D Structures

Publisher Correction: Semi-transparent graphite films growth on Ni and their double-sided polymer-free transfer

Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

A Discussion of “application of Nano-Indentation Methods to Estimate Nanoscale Mechanical Properties of Shale Reservoir Rocks” by K Liu, M Osatadhassan and B Bubach