Abstract:Currently, there is a need to reduce wastes as much as possible in order to develop the concept of sustainability. Self-compaction mortar is one of the most important materials that used in the repair and rehabilitation works of damaged concrete structures. The goal of this study was to investigate the influences of nano TiO2 and nano calcined clay as a sustainable material on fresh and hardened properties of self-compacting mortar. Investigations were carried out to assess the flowrate of self-compacting mortar using the mini flow table and mini-V-funnel tests. The hardened properties were: compressive strength, flexural strength, dry density, water absorption in addition to microstructural properties (as determined by Scanning Electron Microscopy; SEM). Results showed that the addition of nano TiO2 and nano calcined clay was of importance in all properties investigated, by increasing compressive strength by 13, 20 and 22 % for NCC, and by 16, 25 and 29 % for TiO2 respectively at 28-days. According to SEM micrographs, part of the new born CSH crystals was found to be diffused into the matrix pores and were found to densify the interfacial transition zones which caused tendencies toward increased the ultimate strength. So, black pores were filled with extra hydration products and hence, increasing the healing ability of microcracks associated with strength enhancement.

Correction: Ghanei et al. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215

Investigations on the Preparation and Mechanical Properties of the Nano-Alumina Reinforced Cement Composite

Correction: Functionalized graphene-based materials for cementitious applications

Correction: Tong et al. Effect of Micro-Textures on the Surface Interaction of WC+Co Alloy Composite Coatings. Coatings 2022, 12, 1242

Correction to “Effect of Adding Monohydrocalcite on the Microstructural Change in Cement Hydration”

Correction: Molecular dynamics simulation of the mechanical properties of multilayer graphene oxide nanosheets

Correction: Growth Mechanism of Ceria Nanorods by Precipitation at Room Temperature and Morphology-Dependent Photocatalytic Performance

Corrigendum: Micro-Nano Bioactive Glass Particles Incorporated Porous Scaffold for Promoting Osteogenesis and Angiogenesis in vitro

Intermetallic Nanocrystals: Syntheses and Catalytic Applications

Effect of Nano-Tio2 on the Mechanical Properties of Cement Mortar

Correction: Additive-mediated intercalation and surface modification of MXenes

Correction To: Effect of Y2O3 Addition on the Microstructure, Wear Resistance, and Corrosion Behavior of W-4.9Ni-2.1Fe Heavy Alloy

Correction: Core–shell bioceramic fiber-derived biphasic granules with adjustable core compositions for tuning bone regeneration efficacy

Correction: Magnetic yolk-shell mesoporous silica microspheres with supported Au nanoparticles as recyclable high-performance nanocatalysts (Journal of Materials Chemistry (2015) (DOI: 10.1039/c4ta06967f))

Correction: Wang, F., et al. Effect of Low-Frequency Electromagnetic Casting on Micro-Structure and Macro-Segregation of 5A90 Alloy Ingots. Materials 2020, 13, 2720

Correction: Synthesis of porous Fe 3 O 4 hollow microspheres/graphene oxide composite for Cr(vi) removal

Correction: Enhanced field emission stability of vertically aligned carbon nanotubes through anchoring for X-ray imaging applications

Correction: New horizons on advanced nanoscale materials for Cultural Heritage conservation

Experimental investigation on the effect of incorporating nanomaterials on some properties of self-compacting cementitious mortar

Erratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints

Correction: 45S5 bioactive glass-based scaffolds coated with cellulose nanowhiskers for bone tissue engineering