Abstract:It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative investigation of this subject. By combining the computational fluid dynamics (CFD) with the mass transfer equation, a theoretical model is proposed for predicting the details of velocity and concentration distributions as well as the tray efficiency of distillation tray column. Using the proposed model, four different cases corresponding to different assumptions of liquid and vapor flowing condition for a distillation tray column were investigated. In Case I, the distributions of velocity and concentration of the incoming liquid from the downcomer and the uprising vapor from the underneath tray spacing are uniform. In Case n, the distribution of the incoming liquid is non-uniform but the uprising vapor is uniform. In Case HI, the distribution of the incoming liquid is uniform but the uprising vapor is non-uniform. In Case IV, the distributions of both the incoming liquid and the uprising vapor are non-uniform. The details of velocity and concentration distributions on a multiple sieve tray distillation column in four different cases were simulated using the proposed model. It is found that the shape of the simulated concentration profiles of vapor and the liquid is quite different from case to case. The computed results also show that the tray efficiency is highly reduced by the maldistribution of velocity and concentration of the incoming liquid and uprising vapor. The tray efficiency for Case I is higher than Case Ⅱ or Case Ⅲ, and that for Case Ⅳ is the lowest. It also reveals that the accumulated effect of maldistribution becomes more pronounced when the number of column trays increased. The present study demonstrates that the use of computational method to predict the mass transfer efficiency for the tray column, especially for the large one, is feasible.

The fluid dynamic characteristics of the 95-type tray

A New Method for Designing an Energy-Saving Tray and Its Hydrodynamic Aspects: Hydrodynamic Aspects of 95 Trays. A Brief Research Note on the Previous Study

Study on the Gas-liquid Performance of the Compound Tray

Study on the Fluid Dynamics Characteristics of Stirring-Box Tray

A Kind of New Improved Vertical Sieve Tray I. Hydrodynamics

HYDRODYNAMICS OF PLURAL TRAY (Ⅰ) EFFECT OF HOLE DIAMETER AND FREE AREA OF PLURAL TRAY ON HYDRODYNAMIC PROPERTIES

HYDRODYNAMICS OF PLURAL TRAY (Ⅱ)EFFECT OF OPERATING VARIABLE AND LIQUID PHSICAL PROPERTY ON SIEVE TRAY

New Method for Designing an Energy-Saving Tray and Its Hydrodynamic Aspects: Temperature Distribution and Efficiency of Deflected Tray-95

Flow regimes and pressure drop of a composite tridimensional rotational flow sieve tray under concurrent gas‐liquid flow

Experimental study of two phase flow characteristics on the dual-flow tray

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Computational Fluid Dynamics Modeling of Hydrodynamics of A New Type of Fixed Valve Tray

Progress in the Research of Trays

Study on vapor-rise-up through hanging downcomers

Hydrodynamics and mass transfer performance analysis of flow-guided trapezoid spray packing tray

The Analysis of Distillation Tray Column Efficiency by Fluid Dynamics and Mass Transfer Computation

A New Pressure Loose Model in the Rotating-Steam Tray

Effect of Valve Dislocation on Tray Performance

Insights into the weep performance and modeling of perforated plates

Pressure loose model in the rotating-stream tray

Computational study for mass transfer on commercial multi-pass trays