Abstract:Internally threaded tubes, renowned for their exceptional heat transfer capabilities, are extensively used in heat exchangers. However, directly identifying two-phase flow patterns within internally threaded tubes poses a formidable challenge. To address this, this study conducted two-phase flow experiments with R600a within an internally threaded tube, encompassing a range of mass fluxes spanning from 40 t.369o 130 kg m −2 s −1 . The experimental observations unveiled three distinct flow patterns: plug, slug, and annular flow. To validate the accuracy of these observed flow patterns, they were compared with an empirical flow pattern map. Meanwhile, pressure drop signals corresponding to various flow patterns were recorded under different experimental conditions using a high-frequency data acquisition card. The experimental findings indicated that the pressure drop signals fluctuate because of the difference in gas-liquid phase compressibility, while the fluctuation period and flow pattern change simultaneously with the flow rate. Specifically, plug flow exhibited the longest pressure drop fluctuation periods and the sharpest probability density function (PDF) curve. In contrast, annular flow exhibited the shortest fluctuation periods and the least sharp PDF curve. Based on the distinctive characteristics of the PDF curve, a novel parameter, K , was introduced primarily derived from the sharpness of the curve. This led to the formulation of innovative transition criteria, which achieved a prediction accuracy of 86.99% across all datasets in this study. This work furnishes a straightforward methodology for distinguishing flow patterns. The advantages of the proposed criteria include the requirement of measuring only pressure drop fluctuations to identify flow patterns without direct observation.

Flow regimes and pressure drop of a composite tridimensional rotational flow sieve tray under concurrent gas‐liquid flow

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Comparative Study on the Characteristics of Film Flow with Different Corrugation Plates

Study on the flow structures and distribution law of rotational–perforated coupling flow in tridimensional rotational flow sieve tray

CFD simulation of flow properties on the blade unit of a tridimensional rotational flow sieve tray with concurrent gas–liquid flow

Study on the Gas-liquid Performance of the Compound Tray

Experimental and simulated studies on the distribution law of rotational–perforated fluid in tridimensional rotational flow sieve tray

Flow Characteristics of Film Flow over 3D Corrugations Column Plate

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

CFD study on flow characteristics of sieve tray columns with circular downcomers

Study on the Fluid Dynamics Characteristics of Stirring-Box Tray

The fluid dynamic characteristics of the 95-type tray

Flow Pattern Study and Pressure Drop Prediction of Two-Phase Boiling Process in Different Surface Wettability Microchannel

Flow pattern identification for internally threaded tubes based on pressure drop fluctuations

Simulation and Analysis on the Two-Phase Flow Fields in a Rotating-Stream-Tray Absorber by Using Computational Fluid Dynamics

Measurement of Gas and Liquid Flowing Through Holeson the Compound Tray

Pressure drop for two phase counter-current flow in a packed column with a novel internal

CFD Simulation of Gas-liquid Two Phase Cocurrent Upflow through Porous Media

STUDY ON THE HYDRODYNAMIC CHARACTERISTICS OF NS STEREO COMPOSITE TRAYS OF TILT STRIP