Abstract:Abstract The gas-liquid two-phase flow phenomenon in the vertical circular tube widely exists in a variety of industrial equipment, such as steam generators in the nuclear power plant and the bubble towers. The study of the gas-liquid two-phase flow characteristics, especially the movement characteristics of the gas phase or bubbles is significant. Interfacial area concentration (IAC) is defined as the interfacial area between two phases per unit mixture volume, which is a key parameter to predict the interfacial interaction and transfer terms between two phases. Different IAC represents different flow regime. The IAC changes in various flow regimes are usually modeled by the Interfacial Area Transport Equation (IATE). In this paper, Eulerian-Eulerian two-fluid model (EE) and mixture model with one-group interfacial Area Transport Equation (IATE) are used to numerically simulate the upwardly flowing gas-liquid two-phase flow in a vertical circular tube. Simulation results are compared with the experimental results of adiabatic air-water upward flow in a tube with inner diameter of 2 mm and 1 MPa in steady-state condition (Hibiki et al.2001) for evaluating the two-phase flow model with one-group IATE model. Three experimental cases under various gas and fluid velocity conditions of 0.734–1.39 and 0.512–1.282 are selected, in which case 1 and 2 are typical bubbly flows, and case 3 is in a transition between the bubbly and the slug flow regimes. The characteristics of two-phase flow under different gas and liquid flow rate conditions are analyzed, and the applicability of one-group IATEs is evaluated, and finally the sub-models that can be improved are analyzed. Results show that one-group IATE is only suitable for bubbly flow.

CFD Simulation of Gas-liquid Two Phase Cocurrent Upflow through Porous Media

CFD simulation of bubble column with vertical bundle internals

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

CFD Simulation of Gas-Liquid Flow in Bubble Column

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

CFD modeling of gas–solid flow in a two‐stage jetting fluidized bed with an overflow standpipe

CFD study on flow characteristics of sieve tray columns with circular downcomers

CFD modeling of hydrodynamic characteristics of a gas-liquid two-phase stirred tank

Numerical Simulation of Gas-Liquid-Solid Three Phase in Bubble Column

Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor

Numerical Simulation of Two-Phase Flow Using Eulerian-Eulerian Model with One-Group Interfacial Area Transport Equation

A quasi-three-phase approach for simulating gas-solid fluidized bed under different flow patterns

Experiment and multiphase CFD simulation of gas-solid flow in a CFB reactor at various operating conditions: Assessing the performance of 2D and 3D simulations

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Numerical Simulations of Gas–liquid Mass Transfer in Bubble Columns with a CFD–PBM Coupled Model