Abstract:Hydrocyclone separation technique has commonly been applied in engineering for solid-liquid separation. In aquaculture, since Hydrodynamic Vortex Separator (HDVS) is able to control flocs concentration effectively, the Recirculating Biofloc Technology (RBFT) has been gradually acknowledged (Zhu et al., 2016). In order to operate RBFT system at maximum performance, the removal efficiency of HDVS at different Hydraulic Retention Time (HRT) must be fully predictable. The aim of this work is to investigate the relationship between separation efficiency and HRT of HDVS applied in RBFT system, through Computational Fluid Dynamics (CFD) method. For this, a three-dimensional unsteady transient model was developed to simulate the hydrodynamics in HDVS based on the commercial software Workbenching 17.0. A Two Fluid Model (TFM) using kinetic theory of granular flow (KTGF) has been developed to describe the dense solid-liquid (flocs-water) flow field of HDVS in RBFT system. Additionally, the Reynolds averaged Navier-Stokes (RANS) equations with Reynolds stress turbulence model (RSM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. Finally, pilot-scale studies were conducted to evaluate the accuracy and precision of simulation models applied. The results indicate that the flocs removal efficiency of HDVS obtained from tests were less than that from the simulation results at three different HRTs. But it decreased with the decline of HRT both for experiment and simulation. Additionally, the CFD model proposed can enhance the fundamental understanding of the effects of HRT on separation efficiency and at the same time, probably coupled with physical experiment whenever necessary, offer a more reliable way for optimum control of HDVS under varying conditions. Based on the simulation results, the flocs management in RBFT system is briefly discussed.

STUDY ON THE HYDRODYNAMIC CHARACTERISTICS OF NS STEREO COMPOSITE TRAYS OF TILT STRIP

Effect of Structural Parameters on the Performance of NS High-efficiency Composite Trays 1. the Effect of Aperture and Opening Ratio on NS High-efficiency Composite Trays

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

PERFORMANCE EVALUATION OF HYDRODYNAMIC VORTEX SEPARATOR AT DIFFERENT HYDRAULIC RETENTION TIMES APPLIED IN RECIRCULATING BIOFLOC TECHNOLOGY SYSTEM

A New Method for Designing an Energy-Saving Tray and Its Hydrodynamic Aspects: Hydrodynamic Aspects of 95 Trays. A Brief Research Note on the Previous Study

Flow regimes and pressure drop of a composite tridimensional rotational flow sieve tray under concurrent gas‐liquid flow

Hydrodynamics and mass transfer performance analysis of flow-guided trapezoid spray packing tray

Research on Hydrodynamic Characteristics of Cylinder Planing

Experimental Investigation of Hydrodynamics and Suspension Characteristics in a Boiling Stirred Tank Reactor with Helical Coils

Study on the Gas-liquid Performance of the Compound Tray

CFD Dynamic Mesh-Based Simulation and Performance Investigation of Combined Guided Float Valve Tray

HYDRODYNAMICS OF PLURAL TRAY (Ⅰ) EFFECT OF HOLE DIAMETER AND FREE AREA OF PLURAL TRAY ON HYDRODYNAMIC PROPERTIES

Study on High-Speed Water Entry Process of Non-Rotating Vehicles

Prototype Observation Of Flow Characteristics In An Inclined-Tube Settling Tank For Fine Sandy Water Treatment

Experimental Study on A New Suction Inlet Realizable for Uniform Thickness Collection

Computational Fluid Dynamics Modeling of Hydrodynamics of A New Type of Fixed Valve Tray

The fluid dynamic characteristics of the 95-type tray

Experimental study of two phase flow characteristics on the dual-flow tray

HYDRODYNAMICS OF PLURAL TRAY (Ⅱ)EFFECT OF OPERATING VARIABLE AND LIQUID PHSICAL PROPERTY ON SIEVE TRAY

Hydrodynamic investigation of a novel ultra-capacity tray, using centrifugal and inertial separation technologies