Abstract:In situ recycling is one of the most effective methods to dispose of earth pressure balance (EPB) shield waste muck with residual foaming agents with high moisture content. In this context, response surface methodology (RSM) was employed to quantify the effects of independent variables, including flocculant dosage, defoamer dosage, and muck drying mass (MDM) and their interactions on defoaming-flocculation-dewatering indices. The polymeric aluminum chloride (PACL) and hydroxy silicone oil-glycerol polypropylene ether (H-G) were selected as the flocculant and defoamer. The contents of surfactants and foam stabilizers in residual foaming agents were determined using the proposed empirical equation. The defoaming ratio, antifoaming ratio, turbidity, moisture content, filtration loss ratio, and fall cone penetration depth were considered as dependent variables. The accuracy of developed RSM models was verified by the analysis results of variance, residuals, and paired t-test. Combined with the desirability approach, an optimal mixing ratio of 0.078wt.% PACL, 0.016wt.% H-G, and 27.882wt.% MDM was recommended, leading to a defoaming ratio of 98.34vol.% for residual foams and a moisture content of 56.72wt.% for pressure-filtration cakes. Our findings were demonstrated to be able to provide useful guidance for prediction and optimization of the in situ recycling indicators of EPB shield waste muck in metro tunnel construction sites.

Hydrodynamic Analyses for the Dehydration Column of Mitsui PX Oxidation Reactor

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Sidestream Analysis and Optimization of Full Tower Internal Thermally Coupled Air Separation Columns

New Method for Designing an Energy-Saving Tray and Its Hydrodynamic Aspects: Temperature Distribution and Efficiency of Deflected Tray-95

Analysis of sludge ozonation efficiency and its influencing factors in bubble column

Hydraulic Performance of an Annular Pulsed Disc-and-Doughnut Column

Study on the Gas-liquid Performance of the Compound Tray

Hydrodynamics and Mass Transfer in a Pulsed Packed Column

Hydrodynamics and Droplet Size Distribution of Liquid–liquid Flow in a Packed Bed Reactor with Orifice Plates

Hydrodynamics of Φ50 Pulsed Extraction Column with Discs and Doughnuts

Hydrodynamics And Mass-Transfer Of A Sieve Plate Column For Liquid-Liquid-Extraction

Steady operation region design of DJ trays in de-CO2 columns with benfield method

Effect of Operation Modes on Hydrodynamic Performance of Pilot-Scale Pulsed Disc-and-Doughnut and Pulsed Sieve-Plate Columns: A Comparative Study

Influence of Absorbent Composition and Operating Parameters on CO2 Removal Efficiency Using Aqueous Blends of 1-Dimethylamino-2-propanol in Tray Column

Hydrodynamics and OCM reaction performance in a bubbling fluidized bed reactor and a riser reactor

Axial Mixing and Mass Transfer Performance of an Annular Pulsed Disc-And-Doughnut Column

STUDY ON THE HYDRODYNAMICS AND TRANSFER PROPERTIES OF INDUSTRIAL AIRLIFT REACTORS

Optimization of defoaming-flocculation-dewatering indices of earth pressure balance (EPB) shield muck using response surface methodology and desirability approach

Optimization of structural parameters of an inner preheating transpiring-wall SCWO reactor

Hydrodynamic performance and structural optimization of a slurry bubble column with vertical tube internals