Abstract:Sludge conditioning by the Fenton process can effectively reduce sludge water content. The Fenton process has ideal dewaterability at different initial pH levels. However, the difference in the initial pH levels can lead to variations in conditioner dosage, resulting in different environmental impacts and economic pressures. This study provides insights into the role of the life cycle linked response surface methodology (LC-RSM) framework in revealing optimal solutions with both environmental and economic performance in different combinations of conditioners. Response surface methodology (RSM) was used to construct a model of sludge dewatering by the Fenton process, and life cycle assessment and life cycle cost were used to quantify the environmental and economic performance of all conditioning solutions in the model. The LC-RSM optimization solution was 6%–68% and 15%–70% lower than the RSM recommended solution in terms of environmental impacts and economic costs, respectively. For specific impact categories, such as global warming potential, the LC-RSM optimization solution was 19%–56% lower than the RSM recommended solution. In addition, the total environmental impact of the different conditioner combinations ranged between 4.1 and 7.8 Pt and 3.2–6.7 Pt at 53% and 58% of the sludge target water content, respectively. Surprisingly, the environmental impact of the solution with superior dewatering performance (53%) was lower than that of the solution with poor dewatering performance (58%) in many cases. The above results show that the LC-RSM optimization solution has better environmental and economic performance compared to RSM. In addition, the environmental impacts and economic costs of different solutions with the same water content target vary widely, which may lead to comparing sludge conditioning procedures with different targets in an unfair environment. Therefore, a unified platform for comparison is needed, and LC-RSM can provide support. This study can assist decision-makers in identifying the best solution for both environmental and economic performance in a multivariate system and stimulate further discussion on how to compare different processes on a more uniform platform.

Optimization of defoaming-flocculation-dewatering indices of earth pressure balance (EPB) shield muck using response surface methodology and desirability approach

On recycling earth pressure balance shield muck with residual foaming agent: defoaming and antifoaming investigations

Effects of residual foaming agent and defoamer on defoaming-flocculation-filterpress characteristics of earth pressure balance shield muck

Optimization of Formula for Stabilizing Muddy Soil Using Response Surface Methodology

Research on Optimizing Performance of New Slurries for EPBS Soil Conditioning Based on Response Surface Method

Optimization of Hydraulic Condition on Flocculation for Micro-polluted Water

In situ resource reutilization of earth pressure balance (EPB) shield muck for the generation of novel synchronous grouting materials

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Recycling the Discharged Soil from EPBS Tunnels As a Soil Conditioner and Its Rheological Behaviors

Applying organic polymer flocculants in conditioning and advanced dewatering of landfill sludge as a substitution of ferric trichloride and lime: Mechanism, optimization and pilot-scale study

Optimization of flocculation and settling parameters of tailings slurry by response surface methodology

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Improving the Simultaneous Removal of Chemical Oxygen Demand and Terephthalic Acid in A Cross-Flow Aerobic Sludge Reactor by Using Response Surface Methodology

Optimization of and Mechanism for the Coagulation–flocculation of Oil-Field Wastewater from Polymer Flooding

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Efficient Utilization of Waste Shield Slurry and CDW Fines to Prepare Eco-Friendly Controlled Low-Strength Material

Strength behavior of dredged mud slurry treated jointly by cement, metakaolin and flocculant

Revealing the best solution simultaneously for environmental and economic performance using response surface methodology under the perspective of life cycle: A case study of sludge dewatering by the Fenton process

Combined conditioning of dispersant and foam agent for the soil with different clay minerals: an experimental study

Enhanced sludge dewatering using a novel synergistic iron/peroxymonosulfate-polyacrylamide method

Optimization of coagulation removal of fluoride ions from mine wastewater by polyaluminum chloride based on response surface methodology