Abstract:For compressor blade tip stall, one effective way of extending stable operating range is with the application of circumferential grooved casing treatment and its validity was proved by a lot of experimental and numerical investigations. The emphases of most circumferential grooved investigations are focused on the influence of groove depth and groove number on compressor stability, and there is few investigations dealt with the center offset degree of circumferential grooves casing treatment. Hence, an axial compressor rotor with casing treatment(CT) was investigated with experimental and numerical methods to explore the effect of center offset degree on compressor stability and performance.In the work reported here, The center offset degree is defined as the ratio of the central difference between rotor tip axial chord and CT to the axial chord length of rotor tip. When the center of CT is located within the upstream direction of the center of rotor tip axial chord, the value of center offset degree is positive. The experimental and numerical results show that stall margin improvement gained with CT is reduced as the value of center offset degree varies from 0 to 0.33 or -0.33, and the CT with -0.33 center offset degree achieves the lowest value of stall margin improvement at 53% and 73% design rotational speed. The detailed analysis of the flow-field in compressor tip indicates that there is not positive effect made by grooves on leading edge of rotor blade tip when the value of center offset degree is -0.33. As the mass flow of compressor reduces further, tip clearance leakage flow results in the outlet blockage due to the absence of the positive action of grooves near blade tip tail when the value of center offset degree is 0.33. Blockage does not appear in rotor tip passage owing to utilizing the function of all grooves with CT of 0 center offset degree.

Cfd Investigation On The Circumferential Grooves Casing Treatment Of Transonic Compressor

An Analysis of the Circumferential Grooves Casing Treatment for Transonic Compressor Flow

Numerical Investigation of the Casing Treatment Mechanism with a Single Circumferential Groove

A Cfd Study Of Circumferential Groove Casing Treatments In A Transonic Axial Compressor

A CFD STUDY OF CIRCUMFERENTIAL GROOVE CASING TREATMENTS IN A

Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor

Analysis of Impact of a Novel Combined Casing Treatment on Flow Characteristics and Performance of a Transonic Compressor

Performance Enhancement of a Transonic Axial Flow Compressor with Circumferential Casing Grooves to Improve the Stall Margin

Numerical Investigation of the Impacts of Circumferential Single Casing Groove Location on the Overall Performance in a Transonic Fan Rotor

A Computational Fluid Dynamics Study of Circumferential Groove Casing Treatment in A Transonic Axial Compressor

Effect of Circumferential Single Casing Groove Location on the Flow Stability under Tip-Clearance Effect in a Transonic Axial Flow Compressor Rotor

Numerical Investigation of the Circumferential Grooved Casing Treatment As Well As Analyzing the Mechanism of Improve Stall Margin

Axial Transonic Compressor Performance Enhancement with Circumferential Grooves

Development of tip leakage flow in NASA Rotor 37 and casing treatment

Numerical Analysis of the Circumferential Grooves Casing Treatment in a Counter-Rotating Axial Flow Compressor

Investigation of the Casing Groove Location Effect for a Large Tip Clearance in a Counter-Rotating Axial Flow Compressor

Experimental And Numerical Investigation Of Effect Of Center Offset Degree On Compressor Stability With Circumferential Grooved Casing Treatment

Numerical Analysis of Flow in a Centrifugal Compressor with Circumferential Grooves: Influence of Groove Location and Number on Flow Instability

Numerical Investigation of Premature Stall in a Non-Tip-Loaded Rotor Caused by Circumferential Groove Casing Treatment

CFD Study on Casing Treatment in a Transonic Compressor

Numerical Analysis of the Effects of Circumferential Groove Casing Suction in a Counter-Rotating Axial FLow Compressor