Abstract:Superheated steam (SHS) is widely used in various integrated energy systems. Multi-stage continuous-resistance perforated sleeves and n-stage adjustable-resistance perforated plates are the two key throttling components in the multi-stage high pressure reducing valve (MSHPRV) to control SHS flow. However, no general design guidelines on the relationship between aerodynamic features and throttling components were found. In this paper, the fluid dynamics of SHS flow are revealed by using both the experimental and numerical methods. Then, the effects of typical parameters on the pressure drop and Mach number are investigated. Furthermore, an orthogonal design method with array L-9(3(4)) is adopted to achieve the optimized design of throttling components. The results show that SHS flow in the MSHPRV is transonic and shows linear flow rate. Here, the smaller valve opening (L/L-max), chamfer radii (r/D-0) and the larger sleeve diameter (D-1/D-0) relate to the larger pressure drop and smaller Mach raise. Moreover, the n stages achieve n-level pressure drop and Mach raise. The smaller plate diameter (D-2/D-0) and the larger pressure ratio (pi) relate to larger pressure drop and smaller Mach raise. Finally, optimized design of throttling components is achieved with plate diameter D-2/D-0 = 0.4, plate stage n = 3, sleeve diameter D-1/D-0 = 0.8 and chamfer radii r/D-0 = 0.1. (C) 2021 Elsevier Ltd. All rights reserved.

Effect of Valve Dislocation on Tray Performance

The Impact of Valve Tray Geometry on the Interfacial Area of Mass Transfer

Study on the Gas-liquid Performance of the Compound Tray

Interfacial Area on Valve Trays

High-Powered Adaptive Valve Tray

Improvement of Fixed Valve Trays

Experimental Study on the Influence of Velocity on Hydraulic Characteristics in Reactor Lower Plenum

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Effects of Valve Disc on Flow Characteristics Inside a Swing Check Valve During Opening and Closing Processes

Effect of Sleeve Orifices Ratio on Flow Performance and Hydrodynamic Noise in the Two-Stage Sleeve Control Valve

The fluid dynamic characteristics of the 95-type tray

Effects of Sleeve Parameters on Cavitation Control Performance in Steam Trap Valves

Effects of Structural Parameters and Rigidity of Driving Diaphragm on Flow Characteristics of Micro Valveless Pump.

Sleeve Spacing Analysis on Flow Characteristics of Double-Layer Sleeve Control Valve

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Numerical Simulation of the Gas-Solid Flow Around the Valve of Pneumatic Conveying System

Fluid Dynamics Investigation on the Body Structure Inside a Sleeve Regulating Valve

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

The Effects of the Orifice Plate Structure on the Aerodynamic Noise in the High Parameter Pressure Reducing Valve