Abstract:The unloading valve is selected as the key part of pressure control and overload protection system in the emulsion pump station (EPS). However, severe cavitation erosion occurs on the inner wall of the valve sleeve located in a downstream outlet, which leads to the performance deterioration, instability, and even failure of the unloading valve. This paper aims to reduce the cavitation phenomenon by optimizing the structure of the spool and improving the streamline direction of the unloading valve. The change in internal structure can reduce cavitation cloud formation along with the internal mechanism of the valve. The working conditions of its flow versus time-dependent data’s are obtained by AMESim, and considered as the boundary condition in Fluent. In addition, the changes in flow behavior and input data’s are analyze and validate before the structural is optimized. After an analysis, the variations in velocities and vapor phase, indicating the higher in pressure drop at its minimum size of valve opening and further consideration for design and development stages. Two innovative structures of valve throttling spool are proposed as a simplified design stage and then carefully curved based on internal geometry to uniformly distribute the velocity vector and streamlines. Subsequently, the post-CFD results reveal the presence of factors affecting properties such as pressure loss, high velocity in the outlets, and concentrated of the vapor volume fraction are decreased under the modified throttling structure and effectively lowers the intensity of cavitation phenomenon.

Fluid Dynamics Investigation on the Body Structure Inside a Sleeve Regulating Valve

Flow Dynamic Analysis Inside a Sleeve Regulating Valve with Different Valve Core Shapes

Sleeve Spacing Analysis on Flow Characteristics of Double-Layer Sleeve Control Valve

Fluid-structure interaction analysis on vibration characteristics of sleeve control valve

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Cavitation Effect on Flow Resistance of Sleeve Regulating Valve

Dynamic Design and Simulation of Proportional Directional Valve with Displacement Feedback Based on the Moving Valve Sleeve

Modeling and Characteristics Investigation on a Load Control Valve

Flow Rate Adjustable Ratio Analysis of a Novel Control Valve with Double Sleeve

Effect of Sleeve Orifices Ratio on Flow Performance and Hydrodynamic Noise in the Two-Stage Sleeve Control Valve

Experimental and Numerical Investigation of Flow Forces in a Seat Valve Using a Damping Sleeve with Orifices

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Effect of valve core shapes on cavitation flow through a sleeve regulating valve

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Pressure Drop and Cavitation Analysis on Sleeve Regulating Valve

Effects of Sleeve Parameters on Cavitation Control Performance in Steam Trap Valves

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Research on Fluid Dynamics and Thermal Characteristics in Hydraulic Valves by Thermal-Fluid-Solid Coupling Method