Abstract:This paper establishes a transient equivalent circuit of cross‐line same‐phase successive grounding faults, and analyses the characteristics of zero‐sequence current. Then, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed. Finally, a method for faulty line detection based on cross‐correlation distance and transient energy is proposed and different fault conditions verify the effectiveness of proposed method. Currently, theoretical analysis of single‐phase grounding (SPG) faults in low‐current grounding systems has reached a high level of refinement, and the corresponding detection methods have matured. However, there is a significant lack of research on successive grounding (SG) faults, particularly in the area of detecting cross‐line same‐phase successive grounding (CSSG) faults in arc suppression coil grounding systems. To address these issues, a novel faulty line detection method based on transient characteristics of CSSG is proposed. Firstly, a transient equivalent circuit is established, and the characteristics of transient zero‐sequence current (ZSC) are theoretically analysed. Secondly, variational mode decomposition (VMD) is employed to extract low and high‐frequency information from intrinsic mode functions (IMFs). Subsequently, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed, which can accurately detect the occurrence time of secondary faults. Finally, a method for faulty line detection based on cross‐correlation distance (CCD) and transient energy (TE) is proposed. The results of PSCAD simulation under different conditions and field test affirm the accuracy of the analysis and the effectiveness of the proposed method.

Fault type identification of arc grounding based on time-frequency domain characteristics of zero sequence current

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

Single Line-to-Ground Fault Type Multilevel Classification in Distribution Network Using Realistic Recorded Waveform

Single phase to ground arcing fault identification based on wavelet packet energy

Identification of Single-phase Grounding Fault Type in Distribution Network Based on VMD and SVM

Single-phase Grounding Fault Line Selection Method of Ring Distribution Network Based on Classification Method

Typical Fault Characteristics Analysis of Distribution Network

Faulty line detection for cross‐line same‐phase successive ground faults in distribution network based on transient characteristics

Grounding fault test technology of distribution network based on zero sequence power direction judgment

Cause Identification of Single-line-to-ground Fault in Distribution System

Faulty Feeder Identification Based on Data Analysis and Similarity Comparison for Flexible Grounding System in Electric Distribution Networks

Typical Fault Cause Recognition of Single-Phase-to-Ground Fault for Overhead Lines in Nonsolidly Earthed Distribution Networks

A Novel Fault Location Method for High Impedance Grounding Fault in Distribution Network

A Single-Phase to Ground Fault Location Method Based on Last-Squares Parameter Estimation in Arc-Suppression-Coil Grounding System

Series arc fault identification method based on wavelet transform and feature values decomposition fusion DNN

Faulty Feeder Detection for Single-Phase-to-Ground Fault in Distribution Networks Based on Transient Energy and Cosine Similarity

High Impedance Fault Detection Based on Arc Changing Tendency and Nonlinear Least Squares for Active Distribution Networks

Single Phase Grounding Fault Location Based on Frequency Domain Characteristics of Fault Current

Faulted feeder identification and location for a single line-to-ground fault in ungrounded distribution system based on principal frequency component

A novel online monitoring method of ground fault in tree form distribution networks based on power line carrier devices

An Identification Method for Asymmetric Faults With Line Breaks Based on Low-Voltage Side Data in Distribution Networks