Abstract:In spite of the low fuel failure rate in currently operating water cooled nuclear power reactors, operations are increasingly demanding with higher burn-up, power increases, cycle lengths up to 24 months, challenging water chemistry, and the continuous goal of achieving a zero failure rate. All of these factors affect the available margins of the fuel assembly. Thus there is a continued high level of interest in fuel failures. It requires detailed knowledge of existing failure mechanisms, their root causes and remedies. Particularly, the fuel must remain robust against grid-to-rod-fretting, historically the most frequent cause of fuel failure in PWRs worldwide. Grid-to-rod fretting is a significant issue to address in nuclear power plants when considering optimized operating conditions and higher fuel burnups to increase economical performance. The sealing of the rod cladding must always be ensured to prevent unplanned reactor stops and wear resulting from frictional contact between fuel rods and their supporting devices is still the source of leakage worldwide despite significant improvements in the past two decades. The present paper is thus dedicated to the analysis of the fretting mechanism from a fluid–structure interaction point of view. It first introduces theoretical concepts enlightening the basics of turbulent fluid excitation and associated vibratory response of one single tube or a simplified bundle taking into account the mandatory time and space correlations seen in the excitation spectra. The different components of the practical industrial methods implemented to tackle the fretting issues are then described, starting with advanced insights into turbulent spectra in bundle configuration including detailed structures such as supporting grids. A discussion of global flow distribution on rod vibration is also included. Mechanical vibrations are next presented in details, especially in terms of non-linear response, including gaps and contacts in the vicinity of the supports, and time-domain loadings computed from the fluid turbulence spectra previously introduced. Finally, the methods to predict wear from well-chosen quantities extracted from structural dynamics are presented, taking into account the specific materials properties in contact and the lubrication provided by the flowing coolant in the reactor.

Study on the Characteristics of Axial Fluid Excitation on Fuel Rods with Spacer Grids

Numerical Simulation Investigations on the Flow Induced Vibration of a Nuclear Fuel Rod with Relaxed Clamping Structures

Experimental research progress of grid to rod fretting in pressurized water reactors

Numerical Investigation on the Effect of Different Factors on the Flow-Induced Vibration of Wire-Wrapped Fuel Rod under Axial Flow

Numerical simulation study on the fluid excitation force on a nuclear fuel rod with a spacer grid

Flow distribution analysis of annular fuel with spacer grid

A Particle Finite Element Method Based Partitioned Paradigm for the Axial-Flow-induced Vibration Analysis of NHR200-II Fuel Rod

Impact of Nuclear Fuel Assembly Design on Grid-to-Rod Fretting Wear

Numerically simulating the thermal–hydraulic characteristics within the fuel rod bundle using CFD methodology

Analysis of Flow-Induced Vibration of Wire-Wrapped Fuel Assemblies under the Liquid Metal Axial Flow in the Gen-IV Nuclear Reactor

Application of URANS Simulation and Experimental Validation of Axial Flow-Induced Vibrations on a Blunt-End Cantilever Rod for Nuclear Applications

Flow field characteristics of a 127-pin rod bundle with hexagonal spacer grids

Review of spacer grid to rod fretting in pressurized water reactor

CFD Simulation of Flow and Heat Transfer Characteristics in a 5×5 Fuel Rod Bundles with Spacer Grids of Advanced PWR

Grid-to-rod fretting in nuclear power reactors: Driving mechanisms, research methodologies and mitigation measures

Investigating flow and heat transfer characteristics in a fuel bundle with split-vane pair grids by CFD methodology

Influence of Spacer Grid Outer Strap on Fuel Assembly Thermal Hydraulic Performance

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

Numerical Study of the Effect of Helical Fuel Rod Geometry on Single-Phase Flow and Heat Transfer Characteristics

Experimental investigations on flow-induced vibration characteristics of fuel rod with an independent channel for small lead-based reactor

Numerical Simulation and Validation of Flow-Induced Vibration of the Specific Rod under Elastic Supports using One-Way Fluid-Solid Interaction