Abstract:In spite of the low fuel failure rate in currently operating water cooled nuclear power reactors, operations are increasingly demanding with higher burn-up, power increases, cycle lengths up to 24 months, challenging water chemistry, and the continuous goal of achieving a zero failure rate. All of these factors affect the available margins of the fuel assembly. Thus there is a continued high level of interest in fuel failures. It requires detailed knowledge of existing failure mechanisms, their root causes and remedies. Particularly, the fuel must remain robust against grid-to-rod-fretting, historically the most frequent cause of fuel failure in PWRs worldwide. Grid-to-rod fretting is a significant issue to address in nuclear power plants when considering optimized operating conditions and higher fuel burnups to increase economical performance. The sealing of the rod cladding must always be ensured to prevent unplanned reactor stops and wear resulting from frictional contact between fuel rods and their supporting devices is still the source of leakage worldwide despite significant improvements in the past two decades. The present paper is thus dedicated to the analysis of the fretting mechanism from a fluid–structure interaction point of view. It first introduces theoretical concepts enlightening the basics of turbulent fluid excitation and associated vibratory response of one single tube or a simplified bundle taking into account the mandatory time and space correlations seen in the excitation spectra. The different components of the practical industrial methods implemented to tackle the fretting issues are then described, starting with advanced insights into turbulent spectra in bundle configuration including detailed structures such as supporting grids. A discussion of global flow distribution on rod vibration is also included. Mechanical vibrations are next presented in details, especially in terms of non-linear response, including gaps and contacts in the vicinity of the supports, and time-domain loadings computed from the fluid turbulence spectra previously introduced. Finally, the methods to predict wear from well-chosen quantities extracted from structural dynamics are presented, taking into account the specific materials properties in contact and the lubrication provided by the flowing coolant in the reactor.

Effects of displacement amplitude and normal force on fretting wear behavior of zirconium alloy tube in simulated primary water of PWR

Characterization and fretting wear behavior of zirconium alloy treated in high temperature water

Study on the fretting wear performance of oxide layer and Cr coating on zirconium alloy in high-temperature water

Study on Bi-directional Composite Fretting Wear Characteristics of Zr-4 Alloy Tube with Different Phase Differences under Temperature Conditions

Autoclave grid-to-rod fretting corrosion behaviors of the Zr alloy fuel cladding with and without Cr coating through advanced characterization

Experimental study on erosion wear behavior of PFA coated stainless steel tube

Effect of temperature on the fretting wear behavior of Cr-coated Zircaloy cladding in high-temperature pressurized water

Fretting Wear Behavior of Zr-Alloy in Na2so4 Solution

Fretting corrosion behavior and microstructure evolution of hydrided zirconium alloy under gross slip regime in high temperature high pressure water environment

Review of spacer grid to rod fretting in pressurized water reactor

Grid-to-rod fretting in nuclear power reactors: Driving mechanisms, research methodologies and mitigation measures

Understanding the fretting corrosion mechanism of zirconium alloy exposed to high temperature high pressure water

Frequency induced fretting corrosion mechanism evolution of Alloy 690 exposed to simulated secondary water

Modeling and tests on the damage and fracture behaviors of non-irradiated zirconium alloys with different hydrogen concentrations at RT and 350°C

Fretting corrosion running regime and damage mechanism evolution of zirconium alloy mated with Inconel 718 alloy in high temperature high pressure water environment

Effect of hydride orientation on tensile properties and crack formation in zirconium alloy cladding tubes

Friction and Wear Properties of CrAl-Based Coatings for Nuclear Fuel Cladding

Numerical modeling of pressure resistance welding of zirconium alloy tube-end plug joint

Fretting Corrosion Performance Evaluation of Uncoated Cladding, Cr Coating Cladding and AlCrNbSiTi Coating Cladding

Fretting wear-induced sudden loss of corrosion resistance in a corrosion-resistant Ni-based alloy

The role of normal force on the fretting corrosion behaviour of alloy 690 TT tube against 410 stainless steel plate in high temperature high pressure water