Abstract:In spite of the low fuel failure rate in currently operating water cooled nuclear power reactors, operations are increasingly demanding with higher burn-up, power increases, cycle lengths up to 24 months, challenging water chemistry, and the continuous goal of achieving a zero failure rate. All of these factors affect the available margins of the fuel assembly. Thus there is a continued high level of interest in fuel failures. It requires detailed knowledge of existing failure mechanisms, their root causes and remedies. Particularly, the fuel must remain robust against grid-to-rod-fretting, historically the most frequent cause of fuel failure in PWRs worldwide. Grid-to-rod fretting is a significant issue to address in nuclear power plants when considering optimized operating conditions and higher fuel burnups to increase economical performance. The sealing of the rod cladding must always be ensured to prevent unplanned reactor stops and wear resulting from frictional contact between fuel rods and their supporting devices is still the source of leakage worldwide despite significant improvements in the past two decades. The present paper is thus dedicated to the analysis of the fretting mechanism from a fluid–structure interaction point of view. It first introduces theoretical concepts enlightening the basics of turbulent fluid excitation and associated vibratory response of one single tube or a simplified bundle taking into account the mandatory time and space correlations seen in the excitation spectra. The different components of the practical industrial methods implemented to tackle the fretting issues are then described, starting with advanced insights into turbulent spectra in bundle configuration including detailed structures such as supporting grids. A discussion of global flow distribution on rod vibration is also included. Mechanical vibrations are next presented in details, especially in terms of non-linear response, including gaps and contacts in the vicinity of the supports, and time-domain loadings computed from the fluid turbulence spectra previously introduced. Finally, the methods to predict wear from well-chosen quantities extracted from structural dynamics are presented, taking into account the specific materials properties in contact and the lubrication provided by the flowing coolant in the reactor.

Review of spacer grid to rod fretting in pressurized water reactor

Grid-to-rod fretting in nuclear power reactors: Driving mechanisms, research methodologies and mitigation measures

Experimental research progress of grid to rod fretting in pressurized water reactors

Numerical Simulation Investigations on the Flow Induced Vibration of a Nuclear Fuel Rod with Relaxed Clamping Structures

A review of fretting study on nuclear power equipment

Impact of Nuclear Fuel Assembly Design on Grid-to-Rod Fretting Wear

Effects of displacement amplitude and normal force on fretting wear behavior of zirconium alloy tube in simulated primary water of PWR

Large-eddy simulations of turbulent flow for grid-to-rod fretting in nuclear reactors

Study on the Characteristics of Axial Fluid Excitation on Fuel Rods with Spacer Grids

A Particle Finite Element Method Based Partitioned Paradigm for the Axial-Flow-induced Vibration Analysis of NHR200-II Fuel Rod

Recent developments in coupled experiments and simulation to understand the fluid–structure dynamics of a Pressurized Water Reactor fuel assembly

Numerical Study of Coupled Fluid and Solid Wave Propagation Related to the Cladding Failure of a Nuclear Fuel Rod

Progress in Studying the Fretting Wear/corrosion of Nuclear Steam Generator Tubes

An Investigation of the Stiffness Characteristics of a PWR Nuclear Fuel Spacer Grid by a 3D Shell Model

Application of URANS Simulation and Experimental Validation of Axial Flow-Induced Vibrations on a Blunt-End Cantilever Rod for Nuclear Applications

CFD Study on Mechanisms of Fission Gas Burst Release from Defective Fuel Rods of a Typical PWR

A review of CFD studies on thermal hydraulic analysis of coolant flow through fuel rod bundles in nuclear reactor

Analysis of Flow-Induced Vibration of Wire-Wrapped Fuel Assemblies under the Liquid Metal Axial Flow in the Gen-IV Nuclear Reactor

Structural integrity investigations of spent nuclear fuel with finite element modeling

Mock-up conception for experimentally investigate the creep phenomenon caused by the fluid–structure interaction in a rod bundle

CFD Simulation of Flow and Heat Transfer Characteristics in a 5×5 Fuel Rod Bundles with Spacer Grids of Advanced PWR