Abstract:The utilization of a grid spacer with vane is a significant component within reactor fuel channels. The presence of the vane has a notable impact on the mixing of flow and the enhancement of heat transfer within subchannels. The purpose of this work was to perform a numerical analysis of the effects of the vane deflection angle on the flow-thermal characteristics in a fuel rod assembly. In the current analysis, a square array consisting of a 5 × 5 rod bundle was utilized. The pitch-to-rod diameter ratio was set to 1.33, while the blockage ratio of the grid spacer was determined to be 0.16. A relative study was made for flow-thermal characteristics with four different vane deflection angles, such as 21 deg, 25 deg, 29 deg, and 33 deg. Analyses were made for a fluid pressure of 15.5 MPa, an inlet temperature of 583 K, and a velocity of 4.74 m/s. The present study investigated the Shear Stress Transport (SST) k-ω and Renormalization Group (RNG) k-ε turbulence models to analyze flow phenomena and thermal performance. The numerical results were validated through experimental data and also compared with correlations proposed by researchers. The analysis of the results was carried out using various methods, including the examination of data curves and streamlines, as well as vector and contour plots. The results indicate that a higher deflection angle leads to a greater reduction in temperature at the grid spacer. The swirl ratio was observed to be maximum close downstream to the grid spacer, and the persistence of the swirl ratio in the downstream can enhance the performance of departure of nucleate boiling. The vane on the grid spacer with a higher deflection angle enhances the coefficient of heat transfer remarkably close to the downstream grid spacer.

Investigating flow and heat transfer characteristics in a fuel bundle with split-vane pair grids by CFD methodology

Numerically simulating the thermal–hydraulic characteristics within the fuel rod bundle using CFD methodology

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

CFD evaluation of turbulence models for flow simulation of the fuel rod bundle with a spacer assembly

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

CFD Assist in Design of Spacer-Grid with Mixing-Vane for a Rod Bundle

Numerical investigation on flow and heat transfer of petal-shaped fuel bundle in hexagonal arrangement under natural circulation conditions

Investigation on heat split in a vertical 3 × 3 dual-cooled annular rod bundle

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Numerical investigation on critical heat flux for 5 × 5 fuel assemblies with a wide range of working conditions

Numerical study of the flow and heat transfer characteristics within the annular fuel element with double-sided cooling

Numerical Analysis of Effects of Vane Deflection Angle on Flow-Thermal Characteristics in a Fuel Rod Assembly

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Comparative study of flow and heat transfer characteristics of HCF rod bundles in rectangular and triangular arrangement

Numerical investigation on mixing performance in rod bundle with spacer grid based on anisotropic turbulent mixing model

Numerical Simulation of Flow and Heat Transfer in a Square Rotating U-Duct Using Hydrocarbon Fuel

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Finite element analysis of laminar flow and heat transfer in a bundle of cylinders