CFD Assist in Design of Spacer-Grid with Mixing-Vane for a Rod Bundle

Y. Wang,Y. M. Ferng,L. X. Sun

DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.090

IF: 6.4

2019-01-01

Applied Thermal Engineering

Abstract:A three-dimensional (3-D) CFD methodology is developed to assist in the design of mixing-vane spacer-grids for the rod bundle. An adiabatic experiment and a heating experiment for the 5 x 5 rod bundle are adopted to validate this CFD model. The mesh uncertainty is estimated to be approximately 1.26%. The agreement comparison and the small mesh error strongly reveal that the present CFD model can simulate the thermal-hydraulic characteristics for the mixing-vane spacer-grid with enough accuracy and can be applied to assist in the vane design with confidence. The parameters of mixing vane studied in this paper include the deflection angle, the vane length, and the gap distance. Based on the simulation results, the heat transfer can be enhanced by increasing the deflection angle of mixing vane, which can be compensated by the disadvantage of increasing pressure drop. Effects of increasing angle are more significant on the pressure drop than on the heat transfer enhancement. Therefore, in the vane design, the pressure drop dose put a limitation on the increase in the vane angle for increasing its heat transfer capability. In addition, based on the validation resulting and computing resources, the present CFD model using the geometry of full rod bundle with the multi-grids and without the dimples and springs can provide the enough agreement for the engineering design of spacer-grid with mixing vanes.