Abstract:Hypersonic vehicles carry their hydrocarbon fuels as the only regenerative fluid because the existing air-cooled turbine blades cannot meet the stringent heat transfer requirements, including aerodynamic heating in overload environments. In this study, supercritical-pressure n-decane was used as the working medium, and a spiral wire with a wire diameter and pitch of 0.1 and 10 mm was inserted into a smooth circular tube (inner diameter = 2 mm; length = 200 mm) for studying the convective heat transfer characteristics under different rotating speeds, mass flow rates, inlet temperatures, and heat fluxes and investigating the enhanced heat transfer effect of the spiral wire. Experimental results indicate that the overall heat transfer performance of the spiral-wire structure tube was improved by more than 1.3 times compared to that of the smooth tube. Further, at the trailing edge surface at 300 rpm, the Nusselt number increases by an average of two times; in the meanwhile, the PEC value for the reinforced tube is obtained as 1.25–1.68, indicating a better enhanced heat transfer capability in the rotating channel. The experimental results are compared and verified using a computational fluid dynamics method with SST k-ω turbulence model, revealing the maximum relative deviation to be within 13.56 %. The numerical simulation results explain the mechanism of the temperature differences between the leading- and trailing-edge surfaces within the centrifugal section and the reinforcing effect of the interpolated spiral wire. This study provides a novel orientation towards the application of aviation fuel for turbine blade cooling and the efficient heat transfer performance of cooling channels under accelerated conditions.

Numerical Simulation of Flow and Heat Transfer in a Square Rotating U-Duct Using Hydrocarbon Fuel

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Fluid Flow and Convective Heat Transfer in a Rotating Helical Square Duct

Numerical Investigation on Heat Transfer and Oxidation Deposition of Aviation Fuel in a Rotatory U-Channel

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Large Eddy Simulations and Analyses of Hydrocarbon Fuel Heat Transfer in Vertical Upward Flows at Supercritical Pressures

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical Study On Local Heat Transfer In A Rotating Cooling Channel

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Flow and Heat Transfer Characteristics of Coriolis-utilization Rotating Rectangular Smooth Cooling U-channel

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Experimental investigation of convective heat transfer of supercritical pressure hydrocarbon fuel in a horizontal section of a rotating U-duct

Enhanced Heat Transfer Study of Supercritical Hydrocarbon Fuel in Rotating Channel Interpolated with Spiral Wire

Investigating flow and heat transfer characteristics in a fuel bundle with split-vane pair grids by CFD methodology

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Effects of horizontal self-rotation on flow and heat transfer of supercritical n-decane in regenerative circular/rectangular cooling channels

Investigation on heat transfer enhancement of supercritical hydrocarbon fuel in rotating channel interpolated with spiral wire

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis