Abstract:The annular fuel has two cooling surfaces inside and outside, which can fully take away the heat of the fuel assemblies. It is urgent to conduct research on sodium-cooled fast reactor annular fuel assemblies. The Prandtl number Pr of liquid sodium is much less than 1 ( Pr ˂˂ 1). The problem is that using the traditional constant turbulent Prandtl number Pr t of 0.85 ~ 0.9, which will greatly affect the accuracy of the numerical prediction of the thermal-hydraulic properties of liquid sodium. In order to address this issue, the turbulent heat transfer characteristics of the bare and wire spacers 7-pin annular fuel assembly for a sodium-cooled fast reactor are investigated by a SST k-ω-k θ - ε θ model. The open-source CFD software OpenFOAM is used for this calculation. In order to verify the validity of the present calculation method, some classical liquid metal heat transfer correlations are used to compare and analyze the results of the present calculation method ( k θ - ε θ model), the results of the Reynolds analogy hypothesis ( Pr t = 0.85 model), and the results of the turbulent Prandtl number correlation ( Pr t = kays model). It is shown that the SST k-ω-Pr t = 0.85 model overestimates the Nusselt number Nu of the annular fuel assembly. The SST k-ω-k θ - ε θ model agrees well with the SST k-ω-Pr t = Kays model of the bare and wire spacers 7-pin annular fuel assembly . It suggests that the numerical calculation results of the SST k-ω-k θ - ε θ model are reliable in both the simple and complex fuel assembly models. In brief, the SST k-ω-k θ - ε θ model is more capable of predicting the turbulent heat transfer characteristics of the bare and wire spacers 7-pin annular fuel assembly in sodium-cooled fast reactors. In addition, the thermal-hydraulic characteristics of annular fuel assemblies with wire spacers for sodium-cooled fast reactors have been investigated. This research can provide a reference for the study of turbulent heat transfer characteristics of annular fuel assemblies in sodium-cooled fast reactor.

Numerical study of the flow and heat transfer characteristics within the annular fuel element with double-sided cooling

Natural convection heat transfer in concentric annuli with nanofluids

Numerical investigation on critical heat flux for 5 × 5 fuel assemblies with a wide range of working conditions

Investigating flow and heat transfer characteristics in a fuel bundle with split-vane pair grids by CFD methodology

Numerical analysis on the coolant-flow and heat-transfer in the fuel assembly

Numerical study of turbulent heat transfer of annular fuel assembly in a sodium-cooled fast reactor by a SST k-ω-kθ-εθ model

Experimental study on flow and heat transfer of medium-Prandtl-number fluid along a hexagonal helical cruciform seven-rods

Researches on Special Thermal Hydraulic Phenomena of Annular Fuel Assembly by Sub-Channel Analysis Code-NACAF

Numerical investigation on flow and heat transfer of petal-shaped fuel bundle in hexagonal arrangement under natural circulation conditions

Effect of forced lateral vibration on flow and heat transfer performance within an annular fuel element

Flow distribution analysis of annular fuel with spacer grid

Numerical Simulation of Temperature Fields in Planar Fuel Assembly

Investigation on heat split in a vertical 3 × 3 dual-cooled annular rod bundle

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Numerically simulating the thermal–hydraulic characteristics within the fuel rod bundle using CFD methodology

Study on flow and heat transfer characteristics of liquid metal flow in narrow rectangular channels under high heat flux

Thermal-Hydraulic Design of High-Power-Density Annular Fuel in PWRs

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Computational Fluid Dynamics Investigation of Thermal-Hydraulic Characteristics in a Simplified Pebbled Bed Modular Reactor Core Using Different Arrangements of Fuel Elements

CFD study of two-phase cross flow and heat transfer in sub-channels of pressurized water reactor fuel assemblies

Comparison Of Flows And Heat Transfers In Reactor Cores With Spherical-Particle Fuels And Cylindrical-Rod Fuels