Abstract:This letter extends a new isolated bidirectional three‐phase buck‐boost power‐factor‐correction rectifier concept to medium‐voltage input, resulting in an solid‐state transformer (SST) that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single medium‐frequency transformer. The SST's primary side operates modular‐multilevel‐converter bridge legs in the quasi‐two‐level mode to minimize the cell capacitors, while the secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. High‐power applications with low‐voltage (LV) dc loads, for example, fast charging stations for electric vehicles (EVs), are typically supplied from the medium‐voltage (MV) grid. Aiming for low volume, MVac‐LVdc solid‐state transformers (SSTs) that provide galvanic separation with medium‐frequency transformers (MFTs) are thus considered, which are conventionally realized as two‐stage systems that consist of an ac‐dc power‐factor‐correction (PFC) rectifier and an isolated dc‐dc converter. This letter extends a new single‐stage isolated bidirectional PFC rectifier concept to MV levels, resulting in an SST that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single MFT. The SST's primary side operates modular‐multilevel‐converter (MMC) bridge legs, whose input voltages contain large ac components, in the quasi‐two‐level mode to minimize the cell capacitors. The secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐(DAB)‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. The concept is explained and validated using detailed circuit simulations of an exemplary 1‐MW system operating between a 10‐kV three‐phase grid and an 800‐V dc output. The component stresses are evaluated, and an efficiency of 98.1% and a power density of up to 0.6 kW/dm3 are estimated.

A Compact Auxiliary Power Supply Design for a Medium Frequency Solid State Transformer

A Soft Start Approach of Solid-State Transformer

A Soft-Switching Solid-State Transformer Module

Auxiliary Power Supply for Input-Series Output-Parallel Medium-Voltage Solid State Transformers

Design and Testing of a Medium Frequency Transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Auxiliary Power Supply for Solid State Transformer with Ultra High Voltage Capacitive Driving

Design of A Medium Voltage Solid-State Transformer Based on Modular AC-AC Resonant Converter and an Input-Series-Output-Parallel Architecture

Auxiliary power supply for Solid State Transformers

A Novel Solid-State Transformer With Loosely Coupled Resonant Dual-Active-Bridge Converters

A DC Solid-State Transformer with DC Fault Ride-Through Capability

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Power synchronization control for capacitor minimization in Solid State Transformers (SST)

High-Voltage Isolated Multiple Output Auxiliary Power Supply with Output Voltage Self-Regulation

Efficiency Enhancement of DC Solid-State Transformers by Dynamically Adjusting Active Cells

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

500kva Hybrid Solid State Transformer (Hsst): Architecture, Functionality And Control

Common High-Frequency Bus Based Cascaded Multilevel Solid-State Transformer With Ripple and Unbalance Power Decoupling Channel