Abstract:As an eventual replacement of the century-old line frequency transformer (LFT), the Solid-State Transformer (SST) has been investigated intensively in the past decade due to its ability to offer many smart functionalities such as voltage regulation and power flow control in the distribution power grid. For the medium voltage and high voltage SSTs, the availability and cost of high voltage power devices are the major limitations. One possible solution is to use modular SST architecture in an Input-Series-Output-Parallel (ISOP) configuration to reach high input voltage and high-power capacity. However, modular SST introduces additional challenges in control due to the need for many voltage and current sensors, multiple control loops to achieve cell to cell level voltage and power balancing. To address these problems, this paper introduces a novel modular SST solution utilizing single stage AC-AC resonant converter as the modular cell with distributed open loop control. The proposed modular SST is therefore capable of reaching medium and high voltages easily with simple and robust control. The proposed architecture eliminates the DC-DC stage hence the associated bulky DC link capacitors. Higher power density can therefore be achieved. 10 kW modular LLC converter prototype is developed based on 1.2kV SiC MOSFETs. Peak AC-AC efficiency up to 97.3% is achieved and demonstrated. Voltage and power balancing among modular cells are analyzed against cell to cell variations, including resonant frequency, switching frequency and losses. Simulation results show that the proposed modular SST has no performance degradation even considering those variations in a practical system. An ISOP architecture using two LLC converters is also demonstrated with preliminary experimental results, showing that with LLC converters working close to resonant frequency, the input voltage balancing can be achieved.

Auxiliary Power Supply for Input-Series Output-Parallel Medium-Voltage Solid State Transformers

A Compact Auxiliary Power Supply Design for a Medium Frequency Solid State Transformer

A Soft Start Approach of Solid-State Transformer

Auxiliary Power Supply for Solid State Transformer with Ultra High Voltage Capacitive Driving

High-Voltage Isolated Multiple Output Auxiliary Power Supply with Output Voltage Self-Regulation

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

The Design of Auxiliary Power Supply with Wide Range and High Input Voltage

Design of auxiliary power supply for high voltage power electronics devices

Auxiliary power supply for Solid State Transformers

Auxiliary Power Supplies for High-Power Converter Submodules: State of the Art and Future Prospects

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Insulation Design of Wireless Auxiliary Power Supply for Medium Voltage Converters

Stability Analysis of Input-Series/Output-Parallel Solid-State Transformers Equipped With Second-Order Harmonic Active Power Filters

Medium-Voltage Isolated Auxiliary Power Supply Design for High Insulation Capability, Ultra-Low Coupling Capacitance, and Small Size

Design of A Medium Voltage Solid-State Transformer Based on Modular AC-AC Resonant Converter and an Input-Series-Output-Parallel Architecture

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Three-phase Voltage Source Converters Based on Series-Connected Power devices for Medium Voltage Variable Speed Drives.

A 4000v Input Auxiliary Power Supply with Series Connected Sic Mosfets for Mmc-Based Hvdc System

A Hybrid Solid State Transformer (HSST) Based on Two-Stage Medium Voltage SST

A High Input Voltage Auxiliary Power Supply Utilizing Automatic Balanced MOSFET Stack

Hardware Design of a 13.8-Kv/3-mva PV Plus Storage Solid-State Transformer (PVS-SST)