Abstract:Modular multilevel converter (MMC)-based solid-state transformers (SSTs) have gained increasing interest lately. Topologies consisting of cells made of directly coupled MMC submodules (SMs) and dual-active-bridge (DAB) modules have been introduced to form multiport SSTs to interface different grid entities. Designated as modular SSTs (M-SSTs), such devices can interconnect hybrid ac-dc distribution systems and enable flexible power flow control among participating grids with different voltage forms and levels. However, the large capacitors needed to suppress power fluctuations in the power cells are a major contributor to the SST's poor power density. This article first proposes a power fluctuation delivery (PFD) control strategy for M-SST cell capacitance optimization. Through a modified phase-shift control, the low-frequency fluctuating power in the MMC SMs is transferred to the DAB's secondary side and is automatically canceled there. As a result, the cell capacitance requirement is significantly reduced. Considering the modified ripple power path, both power semiconductors and the high-frequency transformers in DABs are affected. Therefore, the design considerations of a single M-SST cell (1 MMC SM + 1 DAB) with/without PFD control are elaborated for a 2-MVA M-SST example. It is shown that the cell capacitance can be reduced to 10% of its original value, and the power density of the whole cell is increased by 50% with only 0.22% drop in the overall efficiency. The feasibility and effectiveness of the proposed method are verified by simulation results in this 2-MVA case and experimental results obtained from a 4.8-kVA scaled-down M-SST prototype.

Efficiency Enhancement of DC Solid-State Transformers by Dynamically Adjusting Active Cells

Adjusting the Number of In-use Cells for Higher Efficiency of A DC Solid State Transformer

Fault Tolerance Scheme for a DC Solid State Transformer

A Soft-Switching Solid-State Transformer Module

Efficiency Improvement of Solid-State Transformers with MMC Front-End AC-DC Converters Through Adjusting DC Bus Voltage and Active Cells

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

A DC Solid-State Transformer with DC Fault Ride-Through Capability

High-Efficiency Control Strategy for 10-Kv/1-mw Solid-State Transformer in PV Application

A Hybrid Isolated Bidirectional DC/DC Solid-State Transformer for DC Distribution Network

A Novel Hybrid DC Transformer Combining Modular Multilevel Converter Structure and Series-Connected Semiconductor Switches

DC Transformer with Series-Connected Power Devices Based on Active Clamp Balancing Circuit

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

High-frequency-link DC Solid State Transformers for Flexible DC Distribution

Back-to-Back H-Bridge Cell Based Modular Solid State Transformer with High-Frequency Link

An Improved DC Solid State Transformer Based on Switched Capacitor and Multiple-Phase-Shift Shoot-Through Modulation for Integration of LVDC Energy Storage System and MVDC Distribution Grid

Modular Circulating Current and Second Harmonic Current Suppression Strategy by Virtual Impedance for DC Solid-State Transformer

Asymmetric Topology Design and Quasi-Zero-Loss Switching Composite Modulation for IGCT-Based High-Capacity DC Transformer

A Sharing-Branch Modular Multilevel DC Transformer with Wide Voltage Range Regulation for DC Distribution Grids

A Hybrid Synchronous and Phase-Shifted Control Strategy for DC Transformer

Design and Control of Power Fluctuation Delivery for Cell Capacitance Optimization in Multiport Modular Solid-State Transformers

Design and Implementation of High Efficiency Control Scheme of Dual Active Bridge Based 10 Kv/1 MW Solid State Transformer for PV Application