Abstract:A three-phase 3.3kV/400kVA voltage source converter (VSC) based on series-connected power devices for medium voltage variable speed drives is designed in this paper. The series-connected power devices are balanced using an active clamping circuit, which consists of an auxiliary switch and a capacitor. During the switching period, the power device voltage will be clamped at the voltage of ACM capacitor. By balancing the voltages of ACM capacitors, we can balance the voltages of series-connected power devices as well. The balancing circuit does not affect the switching of main power devices, and the power devices in the prototype switch at 10kHz. The power loss of the balancing circuit is minor. In each arm of the prototype, double-sided cooling modules as well as heatsinks are stacked vertically to series connect 6 power devices. Experimental tests on the prototype have been tested under 1kV with 4 power devices connected in each arm, and the voltage imbalance degree of the 4 series-connected power devices is less than 5%. Thermal simulation results show the junction temperature is 79°C under the rated power 400kVA. The power density of the prototype is 4.3MVA/m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> .

Auxiliary Power Supply for Solid State Transformer with Ultra High Voltage Capacitive Driving

A Soft Start Approach of Solid-State Transformer

A Soft-switching Universal-input Solid State Transformer

A Soft-Switching Solid-State Transformer Module

Auxiliary Power Supply for Input-Series Output-Parallel Medium-Voltage Solid State Transformers

A Five-level AC/DC Converter for MV Solid-State Transformer

A Compact Auxiliary Power Supply Design for a Medium Frequency Solid State Transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

A Novel ZVS High Voltage Power Supply for Micro-Channel Plate Photomultiplier Tubes

Design and hardware implementation of Gen-1 silicon based solid state transformer

The Design of Auxiliary Power Supply with Wide Range and High Input Voltage

High-Voltage Isolated Multiple Output Auxiliary Power Supply with Output Voltage Self-Regulation

Three-phase Voltage Source Converters Based on Series-Connected Power devices for Medium Voltage Variable Speed Drives.

A DC Solid-State Transformer with DC Fault Ride-Through Capability

Comparisons of different control strategies for 20kVA solid state transformer

Research on Driver for High Voltage Input Double-Transistor Flyback Auxiliary Power Supply

Cascaded Resonant Switched Capacitor Auxiliary Power Supply for Medium Voltage DC

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

A High Input Voltage Auxiliary Power Supply Utilizing Automatic Balanced MOSFET Stack