Abstract:This letter extends a new isolated bidirectional three‐phase buck‐boost power‐factor‐correction rectifier concept to medium‐voltage input, resulting in an solid‐state transformer (SST) that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single medium‐frequency transformer. The SST's primary side operates modular‐multilevel‐converter bridge legs in the quasi‐two‐level mode to minimize the cell capacitors, while the secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. High‐power applications with low‐voltage (LV) dc loads, for example, fast charging stations for electric vehicles (EVs), are typically supplied from the medium‐voltage (MV) grid. Aiming for low volume, MVac‐LVdc solid‐state transformers (SSTs) that provide galvanic separation with medium‐frequency transformers (MFTs) are thus considered, which are conventionally realized as two‐stage systems that consist of an ac‐dc power‐factor‐correction (PFC) rectifier and an isolated dc‐dc converter. This letter extends a new single‐stage isolated bidirectional PFC rectifier concept to MV levels, resulting in an SST that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single MFT. The SST's primary side operates modular‐multilevel‐converter (MMC) bridge legs, whose input voltages contain large ac components, in the quasi‐two‐level mode to minimize the cell capacitors. The secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐(DAB)‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. The concept is explained and validated using detailed circuit simulations of an exemplary 1‐MW system operating between a 10‐kV three‐phase grid and an 800‐V dc output. The component stresses are evaluated, and an efficiency of 98.1% and a power density of up to 0.6 kW/dm3 are estimated.

A Novel Solid-State Transformer With Loosely Coupled Resonant Dual-Active-Bridge Converters

A Soft-Switching Solid-State Transformer Module

Fault Tolerance Scheme for a DC Solid State Transformer

A Soft Start Approach of Solid-State Transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

Design and experiment of a zero-voltage-switching module for bidirectional DC solid-state transformer

High Efficiency Integrated Transformer Design in DAB Converters for Solid-State Transformers

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

Partial Fluctuation Power Control of Resonant Converter in Solid-State Transformer

Efficiency Enhancement of DC Solid-State Transformers by Dynamically Adjusting Active Cells

Back-to-Back H-Bridge Cell Based Modular Solid State Transformer with High-Frequency Link

Solid-State Transformer Architecture Using AC–AC Dual-Active-Bridge Converter

A Dual-Active-Bridge With Half-Bridge Submodules DC Solid-State Transformer for DC Distribution Networks

A Compact Auxiliary Power Supply Design for a Medium Frequency Solid State Transformer

Energy Feed-Forward and Direct Feed-Forward Control for Solid-State Transformer

Common High-Frequency Bus Based Cascaded Multilevel Solid-State Transformer With Ripple and Unbalance Power Decoupling Channel

High-frequency-link DC Solid State Transformers for Flexible DC Distribution