Abstract:A SiO2/Al/LiNbO3 structure has a large electromechanical coupling factor (K2) and good temperature coefficient of frequency (TCF) for the UMTS Band I application. However, the SiO2/Al/LiNbO3 structure also supports two unwanted spurious responses; one is caused by the Rayleigh mode and the other by the transverse-mode. As the authors have previously discussed, the Rayleigh-mode spurious response can be suppressed by controlling the cross-sectional shape of a SiO2 overlay deposited on resonator electrodes. On the other hand, the transverse-mode spurious responses are commonly suppressed by IDT (Interdigital Transducer) apodization, and the length weighting for dummy electrodes selectively could scatter higher order transverse-mode spurious responses. In this paper, the spurious responses of the SAW resonator on a SiO2/Al/LiNbO3 structure are analyzed by the laser probe system. And, a new technique to suppress the transverse-mode spurious responses is proposed. In the technique, the SiO2 overlay is selectively removed from the dummy electrode region. The transverse-mode spurious behavior was dependent on the velocities (vi and vd) in the IDT and the dummy regions. When vi <; vd, the higher-order transverse-mode spurious response could be suppressed. Furthermore, the SAW energy confinement could be enhanced in the IDT electrode region by selectively SiO2 removing. The transverse-mode spurious responses were successfully suppressed without degrading the SAW resonator performances.

AlN/Al0.8Sc0.2N Film S Mode Lamb Wave Resonator with Spurious Mode Suppression

AlN/Al0.8Sc0.2N film S0 mode lamb wave resonator with spurious mode suppression

Spurious-Free S1 Mode AlN/ScAlN-Based Lamb Wave Resonator With Trapezoidal Electrodes

Analysis and Suppression of Spurious In-Plane Lamé-Like Modes in Lamb Wave Resonators

AlN/ScAlN composite films-based spurious free A1 mode lamb wave resonator with adjustable effective electromechanical coupling coefficient

High performance SAW resonator with spurious mode suppression using double-layer electrode transverse modulation

High Figure-of-Merit A1-Mode Lamb Wave Resonators Operating Around 6 GHz Based on the LiNbO3 Thin Film

High Electromechanical Coupling Factor Lamb Wave Resonator

Suppression of Transverse-Mode Spurious Responses by Selectively SiO2 Removing Technique for SAW Resonators on a SiO2/Al/LiNbO3 Structure

4.9 GHz A<inf>1</inf>-mode Lamb Wave Resonator based on Partially Released LN Film

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Investigation of Spurious Mode Suppression in 3.8 GHz Shear-Horizontal Mode Surface Acoustic Wave Resonators Based on LiNbO3/SiO2/Si Multilayer Structure

Ultralow Acoustic Loss Micromachined Butterfly Lamb Wave Resonators on AlN Plates

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

High Q‐factor Anapole Mode Based on Localized Spoof Surface Plasmon Polaritons

Investigation on spurious mode suppression in 3.8-GHz SH-mode SAW resonators based on LiNbO 3 /SiO 2 /Si multilayer structure

Suppression of Transverse-Mode Spurious Responses for Saw Resonators on Sio2/Al/Linbo3 Structure by Selective Removal of Sio2

Transducer design for AlN Lamb wave resonators

Aln Checker-Mode Resonators With Routing Structures

Analysis of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis for Surface Acoustic Wave Resonator on Nonflat SiO<sub>2</sub>/Al/LiNbO<sub>3</sub> Structure

Study on the impact of the resonant cavity and lateral acoustic edge reflector for AlSc 0.095 N-based S0 mode Lamb-wave resonators