Abstract:Research on Cr-coated Zircaloy (Zry) as the most near-term solution for Accident-Tolerant-Fuel (ATF) concept has been boosted in the last decade, while a great concern is addressed on the interfacial failure between coating and substrate. In this study, Cr-Zry bilayer plates were firstly prepared using the diffusion bonding method at different temperatures (1073 and 1273K), subsequently the tensile tests were performed at RT and 573K. The finite element method (FEM) was further applied to simulate the stress distribution and evolution in the Cr-Zry specimen during the tensile test by ABAQUS. The results show that the Cr-Zry bilayer specimens exhibit distinctly different deformation behaviors between RT and 573 K: a two-stage deformation is noted for RT test and no sudden mechanical response for 573 K test, which is attributed to the ductile-to-brittle-transition of Cr. Besides, the fractography reveals delamination and cracks near the Cr/Zry interface at 1273 K-bonded specimens, indicating weak bonding with a higher presence of ZrCr2. Cracks initiating at the interface propagate to the two layers when plastic deformation occurs, caused by the local stress concentration and the followed prefracture at the interface. The presence of interlaminar shear stress is confirmed by FEM simulation, which is due to the transverse stress difference between Cr and Zry layers in the vicinity of the interface, which is probably responsible for the delamination of the Cr-layer. The obtained insights from this study indicate that the Cr-Zircaloy-4 interface is a weak point for Cr-Zry system materials, which will be essential to understand the mechanical behavior of Cr-coated Zr-based ATF claddings in reactors.

Fracture behaviour of Zr(Fe,Cr)<sub>2</sub> Laves phase precipitates in Zircaloy-4 subjected to forging

Fracture behaviour of Zr(Fe,Cr) 2 Laves phase precipitates in Zircaloy-4 subjected to β forging

The formation mechanism of stacking faults in ZrFe2 Laves phase in Zircaloy-4 alloy

Effects of Zr on high temperature deformation and dynamic precipitation of laves phase in Fe–13Cr–5Al–2Mo–0.5Nb–0.4Ta alloy

Unexpected { 01 1 ̄ 1 } pyramidal stacking faults in Zr(Fe, Cr)2 secondary phase particle induced by the C15→C14 Laves phase transformation in Zircaloy-4

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Direct observation of the 12R transition structure during the C15→C14 phase transformation in Zr(Fe, Cr) 2 Laves structured nanoparticles in Zircaloy-4

Improved Deformation Behavior in Ti-Zr-Fe-Mn Alloys Comprising the C14 Type Laves and Β Phases

Low cycle fatigue properties and microscopic deformation structure of Zircaloy-4 in recrystallized and stress-relieved conditions

Microscopic Characterization on Low Cycle Fatigue Behavior at Room Temperature of Zircaloy-4 Alloy with Recrystallized Microstructure

Effect of Cr Incorporation on the Mechanical Properties of HfMoTiZrCr, HfMoNbZrCr, and HfMoNbTiCr Refractory High-Entropy Alloys

Influence of Zr on grain orientation, texture, and mechanical properties in hot- and warm-rolled FeCrAl alloys

Structurally modulated Zr(Fe,Cr)2 secondary phase particles in Zircaloy-4 alloy subjected to cyclic deformation at room temperature

INVESTIGATION OF THE DEFORMATION BEHAVIORS OF DIFFUSION-BONDED CR-ZIRCALOY BILAYER MATERIALS UNDER TENSILE TESTS

Microstructure evolution and mechanical property of high temperature solid-state diffusion bonded Cr-Zry4 with and without a 316 SS interlayer

Deformation and Toughness Behavior of Β -Type Titanium Alloys Comprising C15-type Laves Phase

Enhancing Fracture Toughness of Fine-Grained Zr Via Forming Nanoscale Defect Structures

Experimental kinetic study of interdiffusion behavior and intermetallic compound Zr(Fe,Cr)2 formation at the Cr/Zry4 interface under elevated temperatures

Hierarchical Nanolayered Structures-Enabled Record-High Fracture Resistant Zircaloy

Effect of Cr content on microstructure characteristics and mechanical properties of ZrNbTaHf0.2Crx refractory high entropy alloy

Fracture behavior of the La-doped molybdenum-titanium-zirconium alloy