Abstract:Al alloy 2219 (AA2219) exhibits excellent mechanical properties in a wide temperature range from -250 degrees C to 250 degrees C, indicating great potential for application in aerospace structures. Compared to fusion welding, friction stir welding (FSW) could significantly improve mechanical properties of the AA2219 joints. Since invented by the welding institute (TWI) of UK in 1991, FSW has been treated as a solid-state joining technique by the commercial companies, which has been in an agreement in most scientific researchers. However, recently a controversy that has been raised over the viewpoint that FSW is a strict solid-state process, and some observations of liquation have been reported, especially in the stir zone of friction stir spot welding (FSSW) joint. However, the phenomenon of liquation in FSW AA2219 joints has not been reported previously. Therefore, the aim of this work is to reveal the evidence of local liquation during FSW AA2219-T8 and its effect on mechanical properties of the joints. In this work, AA2219-T8 plates ( 8 mm thick) were friction stir welded at a welding speed of 180 mm/min and a rotation speed of 800 r/min using a welding tool with threaded pin. Heat treatment and thermal simulation experiments were carried out to contrast the characteristics of the local liquation regions. A Vickers microhardness testing machine and an in situ SEM imaging tensile test facility were employed to study the effect of local liquation on mechanical properties of the joints. The results showed that the microstructures in the local liquation regions were divorced eutectic, and its formation was related to the coupled thermal-mechanical interaction during the FSW process. In the FSW process, the local high temperature led to constitutional liquation. During the cooling period, the semisolid mixtures decomposed into a(Al) matrices and theta(Al2Cu) particles under stir and material flow actions. The liquation regions had a lower value of hardness than the normal regions in the nugget zone ( NZ), making the liquidation region susceptible to cracks initiation and decreasing the ultimate tensile strength and elongation for a local liquation region contained NZ sample. However, the negative effect of local liquation regions on the mechanical properties of the FSW AA2219-T8 joint was less than that of the thermo-mechanically affected zone (TMAZ), since the local liquation regions were only localized and tiny fractions being in the NZ, whereas the TMAZ was whole softened.

Constitutional Liquation of the Laves Phase in Virgin FB2 Steel

The Evolutionary Behavior of Laves Phase in Virgin FB2 Steel During Welding and Its Effect on Weld Joints

Evolution Behavior of Laves Phase in Fb2 Martensitic Stainless Steel During Welding

Mechanism for Welding Liquation Cracking in a Boron Containing 9% Cr Martensitic Stainless Steel

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

M 23C 6-Assisted Laves Phase Growth Mechanism in a Novel 9Cr-3W-3Co-1CuVNbB Steel Under Creep Deformation

Local Liquation Phenomenon and Its Effect on Mechanical Properties of Joint in Friction Stir Welded 2219 Al Alloy

Stabilities of the precipitates in CLAM steel during 30,000 h thermal aging

Research on Austenite Transformation of FB2 Heat-Resistant Steel During Welding Heating Process

Diffusional and displacive transformations in interstitial-free steel within the scope of a critical assessment of the mechanical property

Nucleation of W-Rich Laves Phase Nanoparticles in Tempered Martensite Ferritic Steel During Long-Term Aging at Elevated Temperature.

Role of nano-sized precipitates on LCF failure behavior for the CrMoV steel welded joint after long-term high temperature service

High-temperature strengthening mechanism and thermal stability of Laves phase in ferritic matrix

The dissolution behavior of σ-phase and the plasticity recovery of precipitation-embrittlement super-ferritic stainless steel

Effect of stress on the nucleation and evolution of Mo-rich Laves phase in 9.5Cr-1.5MoCoVNbNB heat-resistant steel during tensile rupture at 620 °C

Study on Corrosion Behavior of China low activation Ferritic/martensitic Steel in Static Liquid Lithium

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Developing 1000 MPa grade LCLA steels through continuous cooling: Effects of Cr and cooling rate on bainitic and martensitic transformations

Identification, size classification and evolution of Laves phase precipitates in high chromium, fully ferritic steels

Fracture behaviour of Zr(Fe,Cr) 2 Laves phase precipitates in Zircaloy-4 subjected to β forging

Microstructure, mechanical and fracture properties of friction stir welded 2195 Al-Li alloy joints