Abstract:Magnesium-based alloys are highly sought after in the industry due to their lightweight and reliable strength. However, the hexagonal crystal structure of magnesium results in the mechanical properties' anisotropy. This anisotropy is effectively addressed by alloying magnesium with elements like zirconium, zinc, and rare earth metals (REM). The addition of these elements promotes rapid seed formation, yielding small grains with a uniform orientation distribution, thereby reducing anisotropy. Despite these benefits, the formation of intermetallic phases (IP) containing Zn, Zr, and REM within the microstructure can be a concern. Some of these IP phases can be exceedingly hard and brittle, thus weakening the material by providing easy pathways for crack propagation along grain boundaries (GBs). This issue becomes particularly significant if intermetallic phases form continuous layers along the entire GB between two neighboring GB triple junctions, a phenomenon known as complete GB wetting. To mitigate the risks associated with complete GB wetting and prevent the weakening of the alloy's structure, understanding the potential occurrence of a GB wetting phase transition and how to control continuous GB layers of IP phases becomes crucial. In the investigation of a commercial magnesium alloy, ZEK100, the GB wetting phase transition (i.e., between complete and partial GB wetting) was successfully studied and confirmed. Notably, complete GB wetting was observed at temperatures near the liquidus point of the alloy. However, at lower temperatures, a coexistence of a nano-scaled precipitate film and bulk particles with nonzero contact angles within the same GB was observed. This insight into the wetting transition characteristics holds potential to expand the range of applications for the present alloy in the industry. By understanding and controlling GB wetting phenomena, the alloy's mechanical properties and structural integrity can be enhanced, paving the way for its wider utilization in various industrial applications.

Incommensurately modulated structure zone in α-Zr instigated by the drag force on a grain boundary

Structurally modulated Zr(Fe,Cr)2 secondary phase particles in Zircaloy-4 alloy subjected to cyclic deformation at room temperature

Incommensurately Modulated Structures in Zr-rich PZT: Periodic Nanodomains, Reciprocal Configuration, and Nucleation

FCC-Zr phase transformation-induced defect substructure in Zr2Si precipitates equilibrated in Si-modified Zircaloy-4

Incommensurate modulated structure in zirconium under three-point bending deformation

The formation mechanism of stacking faults in ZrFe2 Laves phase in Zircaloy-4 alloy

Strengthening Mechanism of Ω-Zr

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Transmission Electron Microscopy Observations of Structural Modulation in the Phase Transition from Α-Zr to Ω-Zr Induced by Shear Strain

The Formation Mechanism of a Novel Interfacial Phase with High Thermal Stability in a Mg-Gd-Y-Ag-Zr Alloy

Formation of a Novel X Phase in Mg–Gd–Zn–Zr Alloy

The existing forms of Zr in Mg-Zn-Zr magnesium alloys and its grain refinement mechanism

An SEM/EBSD study of shear bands formation in Al-0.23%wt.Zr alloy deformed in plane strain compression

Coexistence of Intermetallic Complexions and Bulk Particles in Grain Boundaries in the ZEK100 Alloy

Deformation mechanisms of a novel multiphase Zr–30Ti–7Nb–4Sn alloy consisting of β, α′ and α′′ phases

On the formation of anti-phase boundaries and interphase boundaries in Al3Zr precipitates of Al-Cu-Zr alloy studied at atomic scale

Microstructural evolution and analysis of Zr–Co/Cu–Al glassy composites and crystallized alloys via indentation and MD simulations

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

BIAXIAL FATIGUE BEHAVIOR AND MICROSCOPIC DE FORMATION MECHANISM OF ZIRCALOY-4 Ⅱ. Cyclic Deformation Substructures and Texture Development

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation

Atomic-scale Insights on the Plate-Shaped Γ″ Phase in Mg–Gd–Y–Ag–Zr Alloy