Abstract:Indentation creep tests were conducted on non-irradiated and proton irradiated Zircaloy-2 at different temperatures. After indentation creep testing, areas beneath the indentation tip were lift-out by (Focused Ion Beam) FIB, then deformation microstructures of the plastic zone were characterized by TEM. We observed that although it has the highest critical resolved shear stress of available slip modes during room temperature plasticity, under creep deformation dislocations play a significant role in the indentation deformation process. These edge dislocations form dipoles that impede dislocation motion and cause work hardening. For non-irradiated samples, dislocation density in samples tested at 300°C is significantly lower than those tested at room temperature. This may be due to the formation of {1 1 ̄ 01} < 1 ̄ 012> twins at 300°C, which is observed in both irradiated and non-irradiated samples. However, there is no decrease in dislocation density at high temperature in irradiated samples. This is hypothesised to be because irradiation induced loops have more effect in impeding the motion of type dislocations than dislocations. In addition, annealing of dislocation dipoles at 300°C during creep of the non-irradiated sample may contribute to the decrease in dislocation density. Irradiation induced loops were swept away by gliding dislocations during indentation deformation. Irradiation loops that were close to the indent were significantly eliminated while loop-free channels that were parallel with the basal trace formed at positions further away from the indent.

Incommensurate modulated structure in zirconium under three-point bending deformation

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

In-situ observation on the twinning boundary movement of pure zirconium during three-point bending tests

Incommensurately modulated structure zone in α-Zr instigated by the drag force on a grain boundary

Micro-scale mechanism for cyclic deformation behavior in Zirconium under low-cycle-fatigue loading

Fatigue-Induced HCP-to-FCC Phase Transformation Resulting in Two FCC-Zr Variants in Pure Zirconium

Incommensurately Modulated Structures in Zr-rich PZT: Periodic Nanodomains, Reciprocal Configuration, and Nucleation

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Understanding plasticity in zirconium using in-situ measurement of lattice rotations

Study on deformation mechanisms and stretch formability of zirconium alloys with different textures under biaxial tensile stress

Mechanical Behavior of Tetragonal Zirconia Nanopillars Subjected to Uniaxial Loading: A Molecular Dynamics Study

Determination of mechanical properties of pure zirconium processed by surface severe plastic deformation through nanoindentation

Transmission Electron Microscopy Observations of Structural Modulation in the Phase Transition from Α-Zr to Ω-Zr Induced by Shear Strain

An Investigation of Slip and Twinning Behavior of a Zirconium Alloy During Plastic Deformation Based on In-Situ SEM-EBSD

Direct evidence for stress-induced face-centered cubic zirconium

Structurally modulated Zr(Fe,Cr)2 secondary phase particles in Zircaloy-4 alloy subjected to cyclic deformation at room temperature

The formation mechanism of modulation structures along three different crystallographic directions in pure hafnium

Deformation microstructures of non-irradiated and proton irradiated zirconium alloy from nanoindentation creep tests characterised by TEM

New insight into prismatic-type face-centered cubic zirconium phase in pure zirconium

Measurement of competing pathways in a shock-induced phase transition in zirconium by femtosecond diffraction

High Pressure Phase-Transformation Induced Texture Evolution and Strengthening in Zirconium Metal: Experiment and Modeling