Abstract:Isoporous membranes with strong mechanical strength as well as good resistance to swelling and bio-fouling are highly desirable in separation applications. Unfortunately, isoporous membranes combined with all these performances have been rarely prepared as far as we know. In the current work, we tried to produce such membrane from the molecular engineering aspect by synthesizing a new block copolymer poly(hydroxypropylene)-block-polystyrene (PhPP-b-PS) from a common polymer of poly(acrylic acid)-block-polystyrene (PAA-b-PS) via the LiAlH4 mediated reduction reaction. Unlike most of amphiphilic copolymers that usually contained water-soluble polymer or polyelectrolyte as the pore forming segments, PhPP-b-PS was a new polymer with the hydrophilic while water-insoluble PhPP as the pore forming phase. When fabricating into an isoporous membrane, it showed an excellent resistance to bio-fouling due to the electroneutrality of PhPP. Besides, its water flux decreased by only ~12 % in pH ranging from 1 to 12 while flux of controlled membranes prepared from PS-b-PAA reduced by 86 % in the same region, proving the good resistance to pH induced pore swelling. This result was further demonstrated by the molecular sieving to proteins of different sizes. The mechanical strength was finally determined and compared with several well-known membranes, observing that both the elongation at break and toughness of fabricated membranes were comparable with polysulfone ultrafiltration membranes and times higher than art-of-state isoporous membranes. The superior strength of our isoporous membranes was assigned to the unique property of PhPP that tended to form tight physical cross-linking because of high-density hydrogen-bonding interaction along the chains. Results showed herein will open a new avenue for the preparation of next-generation isoporous membranes with outstanding performance from a precise designing of block copolymers with custom-made molecular structures and functionalities.

Microporous Hollow Fiber Membranes Formed from Blends of Isotactic and Atactic Polypropylene

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Preparation and Structural Control of Polyethylene Hollow Fiber Membranes

Preparation and Characterization of Pvdf-Hfp Microporous Membrane by Template Method

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Polypropylene Hollow-Fiber Membrane Made Using the Dissolution-Induced Pores Method

Preparation of poly(4-methyl-1-pentene) asymmetric or microporous hollow-fiber membranes by melt-spun and cold-stretch method

Preparation and Characterization of Microporous Polyethylene Hollow Fiber Membranes

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Morphology, Crystallization Behavior and Tensile Properties of Β-Nucleated Isotactic Polypropylene Fibrous Membranes Prepared by Melt Electrospinning

Polypropylene-poly(lactic acid)hollow fiber membrane by thermally induced phase separation and its performance test

Morphology and Mechanical Behavior of Isotactic Polypropylene (ipp)/syndiotactic Polypropylene (spp) Blends and Fibers

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Mechanically strong, anti-fouling and pH-resistant isoporous membranes prepared from chemically designed new block copolymers

Preparation of Polypropylene Microfiltration Membranes Via Thermally Induced (solid–liquid or Liquid–liquid) Phase Separation Method

High performance zeolite NaA membranes synthesized on the inner surface of zeolite/PES–PI blend composite hollow fibers

Formation of anisotropic microporous isotactic polypropylene (iPP) membrane via thermally induced phase separation

Formation of Isotactic Polypropylene Membranes with Bicontinuous Structure and Good Strength Via Thermally Induced Phase Separation Method

A Design of Composite Hollow Fiber Membranes with Tunable Performance and Reinforced Mechanical Strength

Microporous polypropylene hollow fiber membrane Part I. Surface modification by the graft polymerization of acrylic acid