Abstract:Poly(lactic-co-glycolic acid) (PLGA) is a widely used polymeric biomaterial due to its excellent biocompatibility and biodegradation. Asymmetric PLGA hollow fiber membranes (HFMs) have been extensively used as porous tubular scaffolds for tissue engineering, e.g. for nerve conduits and artificial blood vessels. PLGA HFMs are generally fabricated through a dry-jet wet spinning process, and the porous morphology of PLGA HFMs induced by polymer/solvent/nonsolvent ternary phase inversion plays a key role in their biomedical performance. In this study, PLGA was dissolved in dimethyl sulfoxide (DMSO) as the dope fluid, and deionized water with different DMSO contents was used as the bore fluid. The influence of bore fluid composition on the HFM morphology and performance was investigated by measuring phase separation time, porosity, mechanical properties, and in vitro hydrolytic degradation. The results indicated that with increased bore fluid DMSO content, the inner and outer diameters, as well as the wall thickness of the HFMs, decreased significantly; also, the inner surface became more porous and the inner surface pore size and porosity increased. Cross-sectional SEM images showed that the middle layer of the five-layered microstructure gradually changed from large voids to finger-like microvoids when the DMSO content in bore fluid increased from 0% to 60%. Furthermore, the HFMs resulting from higher DMSO content in bore fluid had a lower porosity, a faster degradation rate, a higher Young's modulus, and a lower suture retention strength. More importantly, the in vitro cell culture on the inner surface of PLGA HFMs showed that PC12 cells cultured on HFMs prepared with 60% DMSO bore fluid exhibited better cell adhesion, longer neurite length, and alignment along the HFM longitudinal axis. A ternary phase diagram and the Flory-Huggins theory were applied to analyze HFM morphological formation. The study contributes to understanding of the mechanism of HFM porous morphology formation and should guide potential application of PLGA HFMs as tissue engineering scaffolds.

Polypropylene-poly(lactic acid)hollow fiber membrane by thermally induced phase separation and its performance test

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Porous Morphology and Mechanical Properties of Poly(lactide-Co-glycolide) Hollow Fiber Membranes Governed by Ternary-Phase Inversion

Formation of anisotropic microporous isotactic polypropylene (iPP) membrane via thermally induced phase separation

Formation of Isotactic Polypropylene Membranes with Bicontinuous Structure and Good Strength Via Thermally Induced Phase Separation Method

Preparation of Polypropylene Microfiltration Membranes Via Thermally Induced (solid–liquid or Liquid–liquid) Phase Separation Method

Preparation of Hyflon AD/Polypropylene Blend Membrane for Artificial Lung

Physicochemical Characteristics of Hollow Fiber Structured Packings in Isopropanol/Water Distillation

Effect of Bore Fluid Composition on Poly(lactic-Co-glycolic Acid) Hollow Fiber Membranes Fabricated by Dry-Jet Wet Spinning

Formation of microporous membrane of isotactic polypropylene in dibutyl phthalate-soybean oil via thermally induced phase separation

A novel tunable polypropylene hollow fiber membrane with gradient structure for extracorporeal membrane oxygenation applications

Preparation Method and Application of Porous Poly(lactic acid) Membranes: A Review

Preparation and characterization of solvent-free fluids reinforced and plasticized polylactic acid fibrous membrane

Structure formation and characterization of PVDF hollow fiber membrane prepared via TIPS with diluent mixture

Green thermally induced phase separation (TIPS) process for braided tube reinforced polyvinylidene fluoride (PVDF) hollow fiber composite membranes with favorable bonding layer

Effects of Mixed Diluents on Isotactic Polypropylene Microporous Membrane Formation Via Thermally Induced Phase Separation Process

[Biological properties study and animal experiment of polylactide/polytrimethylene carbonate blends membrane]

Development of Hydrophilic Polylactic Acid Hollow-Fiber Membranes for Water Remediation

Effect of Polypropylene Molecular Weight on Microporous Membrane Formation Via Thermally Induced Phase Separation

Preparation and morphological characterization of narrow pore size distributed polypropylene hydrophobic membranes for vacuum membrane distillation via thermally induced phase separation