Abstract:Polypropylene microporous membranes were prepared by melt-extrusion and cold-stretching (MSCS) method. The structure changes of microporous membrane during cold stretching, heat setting and hot stretching were studied in suit to reduce the effect of other factors on cold-stretching samples, such as natural retraction induced by cold stretch and the need of cool detection after heat setting. The influences of cold-stretching ratio on micro-lamellae and micropore structure of polypropylene microporous membranes were investigated by in situ small angle X-ray scattering (SAXS), scanning electron microscope (SEM) and differential scanning calorimeter (DSC). The results show that different cold-stretching ratios lead to the different hole formation mechanism. Long-period SAXS signals of the meridian direction at the cold-stretching ratio 15% indicate a slight change of macroscopic strain. Thus the corresponding pore formation mechanism is that cold stretching induces micro defects while hot stretching transforms them into micropores. At the cold stretching ratio 30%, small lamellae transform into unstable bridges and part of the bridges break after heat setting. Besides, noticeable signals of streak emerge in the vertical direction. When the cold-stretching ratio is increased to 40%, signals in stretching direction demonstrate that the growth rate of actual lamellar long period is lower than that of macroscopic strain. This phenomenon can be attributed to that partial skeleton lamellae are destroyed by stretching and transformed into bridging crystal fibers. Macro statistics and micro calculations show that the larger the stretching radio, the shorter the length of bridges and the smaller the aperture. Thus the S-30 is the most appropriate cold-stretching radio to prepare microporous membranes.

Preparation and Structural Control of Polyethylene Hollow Fiber Membranes

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Effect of stretching on structure and properties of polyethylene hollow fiber membranes made by melt-spinning and stretching process

Preparation and Characterization of Microporous Polyethylene Hollow Fiber Membranes

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Effect of Spin-Draw Rate and Stretching Ratio on Polypropylene Hollow Fiber Membrane Made by Melt-Spinning and Stretching Method

Preparation and Performance of Polyethersulfone Hollow-Fiber Membrane

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Preparation of poly(4-methyl-1-pentene) asymmetric or microporous hollow-fiber membranes by melt-spun and cold-stretch method

Fabrication of Polyethylene Nanofibrous Membranes by Biaxial Stretching

Preparation of Highly Oriented Polyethylene Precursor Film with Fibril and Its Influence on Microporous Membrane Formation

STUDY ON THE PREPARATION OF PVDF MICROPOROUS HOLLOW FIBER MEMBRANE

Preparation and Properties of Porous Polytetrafluoroethylene Hollow Fiber Membrane Through Mechanical Operations

Structure and Properties of Electrospun PLLA/PCL/PEG Blend Fibrous Membranes

Effects of Cooling Ways on the Structure of Polypropylene Hollow Fiber Membranes Prepared by Stretching

Effects of Annealing Stress Field on the Structure and Properties of Polypropylene Hollow Fiber Membranes Made by Stretching

In situ Small Angle X-ray Scattering Study on the Pore Formation Mechanism of Polypropylene Microporous Membranes Prepared by the Melt-stretching Method

Preparation of microporous poly(vinylidene fluoride)hollow fiber membranes via thermally induced phase separation

Influence of Material Characteristics on the Structure and Properties of High-Density Polyethylene Microporous Membranes

Effect of the Content of High Molecular Weight Component on Pp Microporous Membranes Obtained by Melt-Extrusion-Stretching Method

Study on the Preparation of High Strength Composite PVDF Hollow Fiber Membrane (ⅱ)the Effect of Concentration of Ethanol in External Coagulation and PET Threads Number on Membrane Performance