Abstract:Hollow fiber membranes fabricated via dry/wet phase inversion method usually have two dense skin layers,which will increase its resistance of mass transport as a support membrane. It is necessary that the dense skin layer of support membrane has been eliminated to improve separation performance of composite membrane. The excellent. chemical resistance of poly(vinylidene fluoride) (PVDF) to many acids and alkalis has made it as an attractive membrane material, and then it's often fabricated as porous hollow fiber membrane by phase inversion. In the process, the formation of the skin layer is due to the rapid exchange between solvent and coagulation, so many attempts have been made to slow it, so as to control the formation of the skin layer. In this paper, it has been found that the fabrication progress becomes unstable, and the membrane prepared has noncircular lumen, when the "weak" or "soft" coagulation is used. To increase the fabrication solution stability during membrane formation, dope viscosity was focused in this experiment. Dimethyl acetamide (DMAc) was used as solvent as well as internal coagulant, and the additives including LiCl, water and surfactant Span were chosen to investigate their effect oil the viscosity of the fabrication solution. The dope viscosity will greatly increase after adding LiCl, while the variety of dope viscosity is unconcerned in the fabrication solution concentration as adding water. The homogenization and stability of the fabrication solution are improved by adding Span,and the viscosity increases at the same time. Without increasing PVDF concentration, the stability of the nascent membrane was improved by increasing the fabrication viscosity. The PVDF hollow fiber membrane with the structure of single outer skin layer and finger-like pore through the cross-section, has been successfully fabricated. The mean pore radius and water flux of the single skin hollow fiber membrane were greatly improved.

A Design of Composite Hollow Fiber Membranes with Tunable Performance and Reinforced Mechanical Strength

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Designing Scalable Dual-Layer Composite Hollow Fiber Nanofiltration Membranes with Fully Cross-Linked Ultrathin Functional Layer

Engineering novel high-flux thin-film composite (TFC) hollow fiber nanofiltration membranes via a facile and scalable coating procedure

Fabrication of a Novel Dual-Layer (PES/PVDF) Hollow Fiber Ultrafiltration Membrane for Wastewater Treatment

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

Fabrication of A High-Flux Thin Film Composite Hollow Fiber Nanofiltration Membrane for Wastewater Treatment

A facile and scalable fabrication procedure for PVDF-PDA/PEI/SiO2 hollow fiber composite ultrafiltration membranes: Integration of co-deposition and cross-linking

Preparation of high-flux polyethylene hollow fiber microfiltration membranes with multiple pore structure through the combination technology of braided tube reinforcement and TIPS method

Designing nanofiltration hollow fiber membranes based on dynamic deposition technology

A New Approach to the Development of Hollow Fiber Membrane Modules for Water Treatment: Mixed Polymer Matrices

Fabrication of a Novel PS4VP/PVDF Dual-Layer Hollow Fiber Ultrafiltration Membrane

A novel polysulfate hollow fiber membrane with antifouling property for ultrafiltration application

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

Robust preparation and reinforcement mechanism study of PVDF hollow fiber membrane with homogeneous fibers

Design and preparation of woven fabric-reinforced substrate: A new pathway for robust thin film composite membrane

Construction of a high-performance hollow fiber composite NF membrane via the simultaneous modification of substrate and selective layer

Scalable dual-layer PVDF loose nanofiltration hollow fiber membranes for treating textile wastewater

Incorporation of an Intermediate Polyelectrolyte Layer for Improved Interfacial Polymerization on PAI Hollow Fiber Membranes

Fabrication of A Dual-Layer (ca/pvdf) Hollow Fiber Membrane for Ro Concentrate Treatment